VMware Player Internet не работает в Ubuntu Host
Я использую Ubuntu 17.04 с VMware Workstation 12 Player. Я установил Windows 10 как Гость в VMware Player. Но не может заставить интернет работать. Получение следующей ошибки:
Could not connect 'Ethernet0' to virtual network '/dev/vmnet8
Настройки сети VMware
Исправлены только мосты и параметры только для хоста.
] My / etc / network / interfaces contents,
auto lo
iface lo inet loopback
Выход / etc / network / interfaces ,
enp7s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 28:d2:44:34:93:89 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 19
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 815450 bytes 378740719 (378.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 815450 bytes 378740719 (378.7 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.110 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::3210:b3ff:fe94:91b8 prefixlen 64 scopeid 0x20<link>
ether 30:10:b3:94:91:b8 txqueuelen 1000 (Ethernet)
RX packets 36388873 bytes 3782447465 (3.7 GB)
RX errors 0 dropped 0 overruns 0 frame 1093979
TX packets 11323909 bytes 2248899815 (2.2 GB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16
Может кто-нибудь мне помочь
Редактировать:
/etc/sysctl.conf contents
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#
#kernel.domainname = example.com
# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3
##############################################################3
# Functions previously found in netbase
#
# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1
# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1
# Uncomment the next line to enable packet forwarding for IPv6
# Enabling this option disables Stateless Address Autoconfiguration
# based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1
###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#
###################################################################
# Magic system request Key
# 0=disable, 1=enable all
# Debian kernels have this set to 0 (disable the key)
# See https://www.kernel.org/doc/Documentation/sysrq.txt
# for what other values do
#kernel.sysrq=1
###################################################################
# Protected links
#
# Protects against creating or following links under certain conditions
# Debian kernels have both set to 1 (restricted)
# See https://www.kernel.org/doc/Documentation/sysctl/fs.txt
#fs.protected_hardlinks=0
#fs.protected_symlinks=0
vm.swappiness = 10
При запуске sudo vmware-modconfig --console --install- все
Stopping VMware services:
VMware Authentication Daemon done
VM communication interface socket family done
Virtual machine communication interface done
Virtual machine monitor done
Blocking file system done
make: Entering directory '/tmp/modconfig-CWgezO/vmmon-only'
Using kernel build system.
/usr/bin/make -C /lib/modules/4.10.0-24-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-headers-4.10.0-24-generic'
CC [M] /tmp/modconfig-CWgezO/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/task.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-CWgezO/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-CWgezO/vmmon-only/linux/driver.c:1291:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) // OUT: TSC max - TSC min
^~~~~~~~~~~~~~~~~~~~~~~
/tmp/modconfig-CWgezO/vmmon-only/linux/driver.c: In function ‘LinuxDriver_Ioctl’:
/tmp/modconfig-CWgezO/vmmon-only/linux/driver.c:1986:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
LD [M] /tmp/modconfig-CWgezO/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CWgezO/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-CWgezO/vmmon-only/vmmon.ko
make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-24-generic'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-CWgezO/vmmon-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-CWgezO/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory '/tmp/modconfig-CWgezO/vmmon-only'
make: Entering directory '/tmp/modconfig-CWgezO/vmnet-only'
Using kernel build system.
/usr/bin/make -C /lib/modules/4.10.0-24-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-headers-4.10.0-24-generic'
CC [M] /tmp/modconfig-CWgezO/vmnet-only/driver.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/hub.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/userif.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/netif.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/bridge.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/smac.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/procfs.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/vnetEvent.o
CC [M] /tmp/modconfig-CWgezO/vmnet-only/vnetUserListener.o
In file included from ./include/linux/pci.h:35:0,
from /tmp/modconfig-CWgezO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-CWgezO/vmnet-only/netif.c:43:
./include/linux/pci_ids.h:2255:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
In file included from /tmp/modconfig-CWgezO/vmnet-only/net.h:38:0,
from /tmp/modconfig-CWgezO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-CWgezO/vmnet-only/netif.c:42:
/tmp/modconfig-CWgezO/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
In file included from ./include/linux/pci.h:35:0,
from /tmp/modconfig-CWgezO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-CWgezO/vmnet-only/netif.c:43:
./include/linux/pci_ids.h:2256:0: warning: "PCI_DEVICE_ID_VMWARE_VMXNET3" redefined
#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07b0
In file included from /tmp/modconfig-CWgezO/vmnet-only/net.h:38:0,
from /tmp/modconfig-CWgezO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-CWgezO/vmnet-only/netif.c:42:
/tmp/modconfig-CWgezO/vmnet-only/vm_device_version.h:73:0: note: this is the location of the previous definition
#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07B0
In file included from /tmp/modconfig-CWgezO/vmnet-only/net.h:38:0,
from /tmp/modconfig-CWgezO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-CWgezO/vmnet-only/bridge.c:52:
/tmp/modconfig-CWgezO/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
In file included from ./include/linux/pci.h:35:0,
from /tmp/modconfig-CWgezO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-CWgezO/vmnet-only/bridge.c:51:
./include/linux/pci_ids.h:2255:0: note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
In file included from /tmp/modconfig-CWgezO/vmnet-only/net.h:38:0,
from /tmp/modconfig-CWgezO/vmnet-only/vnetInt.h:26,
from /tmp/modconfig-CWgezO/vmnet-only/bridge.c:52:
/tmp/modconfig-CWgezO/vmnet-only/vm_device_version.h:73:0: warning: "PCI_DEVICE_ID_VMWARE_VMXNET3" redefined
#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07B0
In file included from ./include/linux/pci.h:35:0,
from /tmp/modconfig-CWgezO/vmnet-only/compat_netdevice.h:27,
from /tmp/modconfig-CWgezO/vmnet-only/bridge.c:51:
./include/linux/pci_ids.h:2256:0: note: this is the location of the previous definition
#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07b0
LD [M] /tmp/modconfig-CWgezO/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-CWgezO/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-CWgezO/vmnet-only/vmnet.ko
make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-24-generic'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-CWgezO/vmnet-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-CWgezO/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory '/tmp/modconfig-CWgezO/vmnet-only'
Starting VMware services:
Virtual machine monitor done
Virtual machine communication interface done
VM communication interface socket family done
Blocking file system done
Virtual ethernet failed
2 ответа
Был шанс переустановить Ubuntu. После этого работает интернет-магазин VMware. Похоже на некоторые проблемы с сетевой конфигурацией.
ifconfig приводит к [, d1] docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 0.0.0.0
ether 02:42:1f:56:ce:6b txqueuelen 0 (Ethernet)
RX packets 24 bytes 1632 (1.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 172 bytes 18293 (18.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp7s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 28:d2:44:34:93:89 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 19
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 432343 bytes 111420404 (111.4 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 432343 bytes 111420404 (111.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vmnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.51.1 netmask 255.255.255.0 broadcast 172.16.51.255
inet6 fe80::250:56ff:fec0:1 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:01 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1990 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vmnet8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.39.1 netmask 255.255.255.0 broadcast 172.16.39.255
inet6 fe80::250:56ff:fec0:8 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:08 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1991 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.110 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::3210:b3ff:fe94:91b8 prefixlen 64 scopeid 0x20<link>
ether 30:10:b3:94:91:b8 txqueuelen 1000 (Ethernet)
RX packets 3634899 bytes 199331024 (199.3 MB)
RX errors 0 dropped 0 overruns 0 frame 106167
TX packets 1116099 bytes 429449640 (429.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16
Теперь сетевые интерфейсы для vmnet созданы правильно, что не удалось ранее.
Был шанс переустановить Ubuntu. После этого работает интернет-магазин VMware. Похоже на некоторые проблемы с сетевой конфигурацией.
ifconfig приводит к [, d1] docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 0.0.0.0
ether 02:42:1f:56:ce:6b txqueuelen 0 (Ethernet)
RX packets 24 bytes 1632 (1.6 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 172 bytes 18293 (18.2 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp7s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 28:d2:44:34:93:89 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 19
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 432343 bytes 111420404 (111.4 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 432343 bytes 111420404 (111.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vmnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.51.1 netmask 255.255.255.0 broadcast 172.16.51.255
inet6 fe80::250:56ff:fec0:1 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:01 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1990 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vmnet8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.39.1 netmask 255.255.255.0 broadcast 172.16.39.255
inet6 fe80::250:56ff:fec0:8 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:c0:00:08 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1991 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.110 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::3210:b3ff:fe94:91b8 prefixlen 64 scopeid 0x20<link>
ether 30:10:b3:94:91:b8 txqueuelen 1000 (Ethernet)
RX packets 3634899 bytes 199331024 (199.3 MB)
RX errors 0 dropped 0 overruns 0 frame 106167
TX packets 1116099 bytes 429449640 (429.4 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16
Теперь сетевые интерфейсы для vmnet созданы правильно, что не удалось ранее.