Пожалуйста, я пытаюсь установить OpenBTS, но я продолжаю получать диск (dpkg-buildpackage: ошибка: Fakeroot Debian / бинарный файл правил дал ошибку выхода состояния 2)

    # checking for a supported radio type
    # - found
    # single component specified
    # - found, building open bts
    # checking for a compatible build host
    # - fully supported host detected: Ubuntu 16.04
    #
    # adding additional repo tools
    # - done

make[2]: Leaving directory '/home/eadetiba/dev/openbts/Transceiver52M'
make[2]: Entering directory '/home/eadetiba/dev/openbts'
rm -rf .libs _libs
test -z "*~" || rm -f *~
rm -f *.lo
make[2]: Leaving directory '/home/eadetiba/dev/openbts'
make[1]: Leaving directory '/home/eadetiba/dev/openbts'
dh_clean 
dh_clean: Pretending DH_COMPAT was set to 5
dh_clean:  - this is a temporary measure to avoid FTBFS in packages
dh_clean:    relying on cdbs to set debian/compat to 5 during the build
dh_clean: No compatibility level specified in debian/compat
dh_clean: This package will soon FTBFS; time to fix it!
 dpkg-source -b openbts
dpkg-source: warning: no source format specified in debian/source/format, see dpkg-source(1)
dpkg-source: info: using source format '1.0'
dpkg-source: warning: source directory 'openbts' is not <sourcepackage>-<upstreamversion> 'openbts-5.0'
dpkg-source: info: building openbts in openbts_5.0.tar.gz
dpkg-source: info: building openbts in openbts_5.0.dsc
 debian/rules build
dh_testdir
# Add here commands to configure the package.
autoreconf -i
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Array.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Convert.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Escaper.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/IndentCanceller.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Indenter.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Object.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/SolidusEscaper.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
NodeManager/Makefile.am:29: warning: source file 'JsonBox-0.4.3/src/Value.cpp' is in a subdirectory,
NodeManager/Makefile.am:29: but option 'subdir-objects' is disabled
TransceiverRAD1/Makefile.am:119: warning: source file '../apps/GetConfigurationKeys.cpp' is in a subdirectory,
TransceiverRAD1/Makefile.am:119: but option 'subdir-objects' is disabled
./configure  --with-uhd
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gawk... (cached) mawk
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking dependency style of gcc... gcc3
checking for rm... /bin/rm
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether byte ordering is bigendian... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.18... yes
checking for x86 cpuid  output... unknown
checking for x86-AVX xgetbv  output... unknown
checking for UHD... yes
checking for x86 cpuid 0x00000001 output... 206a7:2100800:1fbae3ff:bfebfbff
checking whether mmx is supported... yes
checking whether sse is supported... yes
checking whether sse2 is supported... yes
checking whether sse3 is supported... yes
checking whether ssse3 is supported... yes
checking whether sse4.1 is supported... yes
checking whether sse4.2 is supported... yes
checking whether avx is supported by processor... yes
checking for x86-AVX xgetbv 0x00000000 output... 7:0
checking whether avx is supported by operating system... yes
checking whether C compiler accepts -mmmx... yes
checking whether C compiler accepts -msse... yes
checking whether C compiler accepts -msse2... yes
checking whether C compiler accepts -msse3... yes
checking whether C compiler accepts -mssse3... yes
checking whether C compiler accepts -msse4.1... yes
checking whether C compiler accepts -msse4.2... yes
checking whether C compiler accepts -mavx... yes
checking for zmq_init in -lzmq... yes
checking whether libzmq installation works... yes
checking for _init in -la53... yes
checking ortp api version... >= 0.22.0
checking for gethostbyname_r... yes
checking for gethostbyname2_r... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating apps/Makefile
config.status: creating config/Makefile
config.status: creating doc/Makefile
config.status: creating CommonLibs/Makefile
config.status: creating Globals/Makefile
config.status: creating Control/Makefile
config.status: creating GSMShare/Makefile
config.status: creating GSM/Makefile
config.status: creating GPRS/Makefile
config.status: creating SGSNGGSN/Makefile
config.status: creating SIP/Makefile
config.status: creating SMS/Makefile
config.status: creating TransceiverRAD1/Makefile
config.status: creating Transceiver52M/Makefile
config.status: creating TRXManager/Makefile
config.status: creating CLI/Makefile
config.status: creating Peering/Makefile
config.status: creating NodeManager/Makefile
config.status: creating Scanning/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
touch configure-stamp
# Add here commands to compile the arch part of the package.
#/usr/bin/make
touch build-arch-stamp
# Add here commands to compile the indep part of the package.
#/usr/bin/make doc
touch build-indep-stamp
 fakeroot debian/rules binary
dh_testdir
dh_testroot
dh_clean -k -s 
dh_clean: Pretending DH_COMPAT was set to 5
dh_clean:  - this is a temporary measure to avoid FTBFS in packages
dh_clean:    relying on cdbs to set debian/compat to 5 during the build
dh_clean: dh_clean -k is deprecated; use dh_prep instead
dh_clean: No compatibility level specified in debian/compat
dh_clean: This package will soon FTBFS; time to fix it!
dh_installdirs -s
dh_installdirs: No compatibility level specified in debian/compat
dh_installdirs: This package will soon FTBFS; time to fix it!
dh_installdirs: Compatibility levels before 4 are no longer supported (level 1 requested)
END failed--call queue aborted.
debian/rules:74: recipe for target 'install-arch' failed
make: *** [install-arch] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
# ERROR: command failed!