Я пытаюсь использовать провайдера вручную для настройки среды juju на удаленном сервере; при попытке выполнить загрузку juju я получаю:
ОШИБКА при инициализации хранилища SSH не выполнена: не удалось создать каталог dir: в подпроцессе обнаружен код ошибки 255 (доступ запрещен (publickey).)
Я сгенерировал свою конфигурацию в соответствии с документацией для провайдера вручную ( https://jujucharms.com/docs/stable/clouds-manual ), и у меня есть доступ по ssh на рассматриваемой машине (например, частный ключ у меня действующий).
Я понятия не имею, что здесь блокирует; Я получаю одно и то же сообщение, запускающее загрузку словесно.
Введите файл конфигурации SSH:
# contents of $HOME/.ssh/config
Host juju-bootstrap
HostName 1.2.3.4 # assuming that public ip address of the bootstrap-host is 1.2.3.4
User uname # assuming that defined bootstrap-user is uname
IdentityFile ~/.ssh/yourprivateky
При использовании ssh Juju будет соблюдать определенную конфигурацию и подключение без проблемы.
, Кроме того, необходимо было бы добавить запись в/etc/hosts, чтобы позволить Juju связаться по http (s)
1.2.3.4 juju-bootstrap
Спасибо за фрагмент кода... сохранил меня много времени!
Я должен был обработать пару дополнительных случаев парсинга, таких как порядковые слова ("первый", "второй"), написанные через дефис слова ("сто"), и написал через дефис порядковые слова как ("пятьдесят седьмой"), таким образом, я добавил пару строк:
def text2int(textnum, numwords={}):
if not numwords:
units = [
"zero", "one", "two", "three", "four", "five", "six", "seven", "eight",
"nine", "ten", "eleven", "twelve", "thirteen", "fourteen", "fifteen",
"sixteen", "seventeen", "eighteen", "nineteen",
]
tens = ["", "", "twenty", "thirty", "forty", "fifty", "sixty", "seventy", "eighty", "ninety"]
scales = ["hundred", "thousand", "million", "billion", "trillion"]
numwords["and"] = (1, 0)
for idx, word in enumerate(units): numwords[word] = (1, idx)
for idx, word in enumerate(tens): numwords[word] = (1, idx * 10)
for idx, word in enumerate(scales): numwords[word] = (10 ** (idx * 3 or 2), 0)
ordinal_words = {'first':1, 'second':2, 'third':3, 'fifth':5, 'eighth':8, 'ninth':9, 'twelfth':12}
ordinal_endings = [('ieth', 'y'), ('th', '')]
textnum = textnum.replace('-', ' ')
current = result = 0
for word in textnum.split():
if word in ordinal_words:
scale, increment = (1, ordinal_words[word])
else:
for ending, replacement in ordinal_endings:
if word.endswith(ending):
word = "%s%s" % (word[:-len(ending)], replacement)
if word not in numwords:
raise Exception("Illegal word: " + word)
scale, increment = numwords[word]
current = current * scale + increment
if scale > 100:
result += current
current = 0
return result + current`
Я использовал импорт nltk nltk.download ('punkt'), и он работает.
from nltk.tokenize import word_tokenize
import nltk
nltk.download('punkt')
macbeth_text_words = (word_tokenize(macbeth_text))
n_words = len(macbeth_text_words)
unique_words = len(set(macbeth_text_words))
print('Total Words: %d' % n_words)
print('Unique Words: %d' % unique_words)
Быстрое решение состоит в том, чтобы использовать inflect.py для генерации словаря для перевода.
inflect.py имеет number_to_words()
функция, которая повернет число (например, 2
) к он - словоформа (например, 'two'
). К сожалению, его реверс (который позволил бы Вам избегать маршрута переводного словаря) не предлагается. Все равно можно использовать ту функцию для создания переводного словаря:
>>> import inflect
>>> p = inflect.engine()
>>> word_to_number_mapping = {}
>>>
>>> for i in range(1, 100):
... word_form = p.number_to_words(i) # 1 -> 'one'
... word_to_number_mapping[word_form] = i
...
>>> print word_to_number_mapping['one']
1
>>> print word_to_number_mapping['eleven']
11
>>> print word_to_number_mapping['forty-three']
43
, Если Вы готовы фиксировать некоторое время, могло бы быть возможно исследовать внутренние работы inflect.py эти number_to_words()
функция и создать Ваш собственный код, чтобы сделать это динамично (я не попытался сделать это).
Существует рубиновый драгоценный камень Marc Burns, который делает это. Я недавно разветвил его для добавления поддержки в течение многих лет. Можно звонить код Ruby от python.
require 'numbers_in_words'
require 'numbers_in_words/duck_punch'
nums = ["fifteen sixteen", "eighty five sixteen", "nineteen ninety six",
"one hundred and seventy nine", "thirteen hundred", "nine thousand two hundred and ninety seven"]
nums.each {|n| p n; p n.in_numbers}
результаты:
"fifteen sixteen"
1516
"eighty five sixteen"
8516
"nineteen ninety six"
1996
"one hundred and seventy nine"
179
"thirteen hundred"
1300
"nine thousand two hundred and ninety seven"
9297
Внесенное изменение так, чтобы text2int (масштаб) возвратил корректное преобразование. Например, text2int ("сотня") => 100.
import re
numwords = {}
def text2int(textnum):
if not numwords:
units = [ "zero", "one", "two", "three", "four", "five", "six",
"seven", "eight", "nine", "ten", "eleven", "twelve",
"thirteen", "fourteen", "fifteen", "sixteen", "seventeen",
"eighteen", "nineteen"]
tens = ["", "", "twenty", "thirty", "forty", "fifty", "sixty",
"seventy", "eighty", "ninety"]
scales = ["hundred", "thousand", "million", "billion", "trillion",
'quadrillion', 'quintillion', 'sexillion', 'septillion',
'octillion', 'nonillion', 'decillion' ]
numwords["and"] = (1, 0)
for idx, word in enumerate(units): numwords[word] = (1, idx)
for idx, word in enumerate(tens): numwords[word] = (1, idx * 10)
for idx, word in enumerate(scales): numwords[word] = (10 ** (idx * 3 or 2), 0)
ordinal_words = {'first':1, 'second':2, 'third':3, 'fifth':5,
'eighth':8, 'ninth':9, 'twelfth':12}
ordinal_endings = [('ieth', 'y'), ('th', '')]
current = result = 0
tokens = re.split(r"[\s-]+", textnum)
for word in tokens:
if word in ordinal_words:
scale, increment = (1, ordinal_words[word])
else:
for ending, replacement in ordinal_endings:
if word.endswith(ending):
word = "%s%s" % (word[:-len(ending)], replacement)
if word not in numwords:
raise Exception("Illegal word: " + word)
scale, increment = numwords[word]
if scale > 1:
current = max(1, current)
current = current * scale + increment
if scale > 100:
result += current
current = 0
return result + current
Быстрый и грязный порт Java реализации e_h C# (выше). Обратите внимание что оба возврата дважды, не интервал
public class Text2Double {
public double Text2Double(String text) {
String[] units = new String[]{
"zero", "one", "two", "three", "four", "five", "six", "seven", "eight",
"nine", "ten", "eleven", "twelve", "thirteen", "fourteen", "fifteen",
"sixteen", "seventeen", "eighteen", "nineteen",
};
String[] tens = new String[]{"", "", "twenty", "thirty", "forty", "fifty", "sixty", "seventy", "eighty", "ninety"};
String[] scales = new String[]{"hundred", "thousand", "million", "billion", "trillion"};
Map<String, ScaleIncrementPair> numWord = new LinkedHashMap<>();
numWord.put("and", new ScaleIncrementPair(1, 0));
for (int i = 0; i < units.length; i++) {
numWord.put(units[i], new ScaleIncrementPair(1, i));
}
for (int i = 1; i < tens.length; i++) {
numWord.put(tens[i], new ScaleIncrementPair(1, i * 10));
}
for (int i = 0; i < scales.length; i++) {
if (i == 0)
numWord.put(scales[i], new ScaleIncrementPair(100, 0));
else
numWord.put(scales[i], new ScaleIncrementPair(Math.pow(10, (i * 3)), 0));
}
double current = 0;
double result = 0;
for(String word : text.split("[ -]"))
{
ScaleIncrementPair scaleIncrement = numWord.get(word);
current = current * scaleIncrement.scale + scaleIncrement.increment;
if (scaleIncrement.scale > 100) {
result += current;
current = 0;
}
}
return result + current;
}
}
public class ScaleIncrementPair
{
public double scale;
public int increment;
public ScaleIncrementPair(double s, int i)
{
scale = s;
increment = i;
}
}
Это - c# реализация кода в 1-м ответе:
public static double ConvertTextToNumber(string text)
{
string[] units = new string[] {
"zero", "one", "two", "three", "four", "five", "six", "seven", "eight",
"nine", "ten", "eleven", "twelve", "thirteen", "fourteen", "fifteen",
"sixteen", "seventeen", "eighteen", "nineteen",
};
string[] tens = new string[] {"", "", "twenty", "thirty", "forty", "fifty", "sixty", "seventy", "eighty", "ninety"};
string[] scales = new string[] { "hundred", "thousand", "million", "billion", "trillion" };
Dictionary<string, ScaleIncrementPair> numWord = new Dictionary<string, ScaleIncrementPair>();
numWord.Add("and", new ScaleIncrementPair(1, 0));
for (int i = 0; i < units.Length; i++)
{
numWord.Add(units[i], new ScaleIncrementPair(1, i));
}
for (int i = 1; i < tens.Length; i++)
{
numWord.Add(tens[i], new ScaleIncrementPair(1, i * 10));
}
for (int i = 0; i < scales.Length; i++)
{
if(i == 0)
numWord.Add(scales[i], new ScaleIncrementPair(100, 0));
else
numWord.Add(scales[i], new ScaleIncrementPair(Math.Pow(10, (i*3)), 0));
}
double current = 0;
double result = 0;
foreach (var word in text.Split(new char[] { ' ', '-', '—'}))
{
ScaleIncrementPair scaleIncrement = numWord[word];
current = current * scaleIncrement.scale + scaleIncrement.increment;
if (scaleIncrement.scale > 100)
{
result += current;
current = 0;
}
}
return result + current;
}
public struct ScaleIncrementPair
{
public double scale;
public int increment;
public ScaleIncrementPair(double s, int i)
{
scale = s;
increment = i;
}
}
Мне было нужно что-то немного различное, так как мой вход от преобразования речи в тексте, и решение не состоит в том, чтобы всегда суммировать числа. Например, "мой индекс один два три четыре пять", не должен преобразовывать в "мой индекс, 15".
я взял Andrew ответ и настроил его для обработки нескольких других людей случаев, выделенных как ошибки и также добавленная поддержка примеров как индекс один, я упомянул выше. Некоторые случаи базового теста показывают ниже, но я уверен, что существует все еще простор для совершенствования.
def is_number(x):
if type(x) == str:
x = x.replace(',', '')
try:
float(x)
except:
return False
return True
def text2int (textnum, numwords={}):
units = [
'zero', 'one', 'two', 'three', 'four', 'five', 'six', 'seven', 'eight',
'nine', 'ten', 'eleven', 'twelve', 'thirteen', 'fourteen', 'fifteen',
'sixteen', 'seventeen', 'eighteen', 'nineteen',
]
tens = ['', '', 'twenty', 'thirty', 'forty', 'fifty', 'sixty', 'seventy', 'eighty', 'ninety']
scales = ['hundred', 'thousand', 'million', 'billion', 'trillion']
ordinal_words = {'first':1, 'second':2, 'third':3, 'fifth':5, 'eighth':8, 'ninth':9, 'twelfth':12}
ordinal_endings = [('ieth', 'y'), ('th', '')]
if not numwords:
numwords['and'] = (1, 0)
for idx, word in enumerate(units): numwords[word] = (1, idx)
for idx, word in enumerate(tens): numwords[word] = (1, idx * 10)
for idx, word in enumerate(scales): numwords[word] = (10 ** (idx * 3 or 2), 0)
textnum = textnum.replace('-', ' ')
current = result = 0
curstring = ''
onnumber = False
lastunit = False
lastscale = False
def is_numword(x):
if is_number(x):
return True
if word in numwords:
return True
return False
def from_numword(x):
if is_number(x):
scale = 0
increment = int(x.replace(',', ''))
return scale, increment
return numwords[x]
for word in textnum.split():
if word in ordinal_words:
scale, increment = (1, ordinal_words[word])
current = current * scale + increment
if scale > 100:
result += current
current = 0
onnumber = True
lastunit = False
lastscale = False
else:
for ending, replacement in ordinal_endings:
if word.endswith(ending):
word = "%s%s" % (word[:-len(ending)], replacement)
if (not is_numword(word)) or (word == 'and' and not lastscale):
if onnumber:
# Flush the current number we are building
curstring += repr(result + current) + " "
curstring += word + " "
result = current = 0
onnumber = False
lastunit = False
lastscale = False
else:
scale, increment = from_numword(word)
onnumber = True
if lastunit and (word not in scales):
# Assume this is part of a string of individual numbers to
# be flushed, such as a zipcode "one two three four five"
curstring += repr(result + current)
result = current = 0
if scale > 1:
current = max(1, current)
current = current * scale + increment
if scale > 100:
result += current
current = 0
lastscale = False
lastunit = False
if word in scales:
lastscale = True
elif word in units:
lastunit = True
if onnumber:
curstring += repr(result + current)
return curstring
Некоторые тесты...
one two three -> 123
three forty five -> 345
three and forty five -> 3 and 45
three hundred and forty five -> 345
three hundred -> 300
twenty five hundred -> 2500
three thousand and six -> 3006
three thousand six -> 3006
nineteenth -> 19
twentieth -> 20
first -> 1
my zip is one two three four five -> my zip is 12345
nineteen ninety six -> 1996
fifty-seventh -> 57
one million -> 1000000
first hundred -> 100
I will buy the first thousand -> I will buy the 1000 # probably should leave ordinal in the string
thousand -> 1000
hundred and six -> 106
1 million -> 1000000
Я только что выпустил модуль Python к PyPI, названной word2number для точной цели. https://Установка github.com/akshaynagpal/w2n
это использование:
pip install word2number
удостоверяются, что Ваше зернышко обновляется к последней версии.
Использование:
from word2number import w2n
print w2n.word_to_num("two million three thousand nine hundred and eighty four")
2003984
Если кому-либо интересно, я изрубил версию, которая поддерживает остальную часть строки (хотя она может иметь ошибки, не протестировали его слишком много).
def text2int (textnum, numwords={}):
if not numwords:
units = [
"zero", "one", "two", "three", "four", "five", "six", "seven", "eight",
"nine", "ten", "eleven", "twelve", "thirteen", "fourteen", "fifteen",
"sixteen", "seventeen", "eighteen", "nineteen",
]
tens = ["", "", "twenty", "thirty", "forty", "fifty", "sixty", "seventy", "eighty", "ninety"]
scales = ["hundred", "thousand", "million", "billion", "trillion"]
numwords["and"] = (1, 0)
for idx, word in enumerate(units): numwords[word] = (1, idx)
for idx, word in enumerate(tens): numwords[word] = (1, idx * 10)
for idx, word in enumerate(scales): numwords[word] = (10 ** (idx * 3 or 2), 0)
ordinal_words = {'first':1, 'second':2, 'third':3, 'fifth':5, 'eighth':8, 'ninth':9, 'twelfth':12}
ordinal_endings = [('ieth', 'y'), ('th', '')]
textnum = textnum.replace('-', ' ')
current = result = 0
curstring = ""
onnumber = False
for word in textnum.split():
if word in ordinal_words:
scale, increment = (1, ordinal_words[word])
current = current * scale + increment
if scale > 100:
result += current
current = 0
onnumber = True
else:
for ending, replacement in ordinal_endings:
if word.endswith(ending):
word = "%s%s" % (word[:-len(ending)], replacement)
if word not in numwords:
if onnumber:
curstring += repr(result + current) + " "
curstring += word + " "
result = current = 0
onnumber = False
else:
scale, increment = numwords[word]
current = current * scale + increment
if scale > 100:
result += current
current = 0
onnumber = True
if onnumber:
curstring += repr(result + current)
return curstring
Пример:
>>> text2int("I want fifty five hot dogs for two hundred dollars.")
I want 55 hot dogs for 200 dollars.
могли быть проблемы, если у Вас есть, скажем, "200$". Но, это было действительно грубо.
This code works only for numbers below 99.
both word to Int and int to word.
(for rest need to implement 10-20 lines of code and simple logic. This is just simple code for beginners)
num=input("Enter the number you want to convert : ")
mydict={'1': 'One', '2': 'Two', '3': 'Three', '4': 'Four', '5': 'Five','6': 'Six', '7': 'Seven', '8': 'Eight', '9': 'Nine', '10': 'Ten','11': 'Eleven', '12': 'Twelve', '13': 'Thirteen', '14': 'Fourteen', '15': 'Fifteen', '16': 'Sixteen', '17': 'Seventeen', '18': 'Eighteen', '19': 'Nineteen'}
mydict2=['','','Twenty','Thirty','Fourty','fifty','sixty','Seventy','Eighty','Ninty']
if num.isdigit():
if(int(num)<20):
print(" :---> "+mydict[num])
else:
var1=int(num)%10
var2=int(num)/10
print(" :---> "+mydict2[int(var2)]+mydict[str(var1)])
else:
num=num.lower();
dict_w={'one':1,'two':2,'three':3,'four':4,'five':5,'six':6,'seven':7,'eight':8,'nine':9,'ten':10,'eleven':11,'twelve':12,'thirteen':13,'fourteen':14,'fifteen':15,'sixteen':16,'seventeen':'17','eighteen':'18','nineteen':'19'}
mydict2=['','','twenty','thirty','fourty','fifty','sixty','seventy','eighty','ninty']
divide=num[num.find("ty")+2:]
if num:
if(num in dict_w.keys()):
print(" :---> "+str(dict_w[num]))
elif divide=='' :
for i in range(0, len(mydict2)-1):
if mydict2[i] == num:
print(" :---> "+str(i*10))
else :
str3=0
str1=num[num.find("ty")+2:]
str2=num[:-len(str1)]
for i in range(0, len(mydict2) ):
if mydict2[i] == str2:
str3=i;
if str2 not in mydict2:
print("----->Invalid Input<-----")
else:
try:
print(" :---> "+str((str3*10)+dict_w[str1]))
except:
print("----->Invalid Input<-----")
else:
print("----->Please Enter Input<-----")