Установите Ubuntu Server на флешку, навсегда

Прежде всего, я хотел убедиться, что есть понимание того, о чем НЕ этот пост:

Я хочу иметь домашний NAS (файловый) сервер, который загружается с USB-накопителя или CF-карты. Для пункта этого поста не имеет значения, как подключена флешка (USB, IDE, каким-то другим способом), что имеет отношение: я хочу, чтобы вся установка операционной системы загружалась и работала с флешки. Причины, по которым я хочу именно этот тип установки: я хочу иметь возможность легко создавать резервную копию операционной системы (образ флэш-памяти), я хочу быть уверенным, что могу мгновенно заменить операционную систему и загрузить ее (заменив флэш-диск) ), и я хочу, чтобы диски на файловых серверах можно было заменять отдельно от ОС.

Я знаю, что можно просто отформатировать флешку как ext2 и установить на нее. Я ищу рекомендации по созданию более надежного решения. Вот несколько вещей, которые я собираюсь сделать:

  • настроить корневой раздел как YAFF2, или LogFS, или как некоторую другую файловую систему, разработанную специально для флэш-накопителей.
  • перенастроить базовую ОС для минимизации операций записи (ramfs в / tmp и т. Д.)

Пожалуйста, отправьте ваши рекомендации. Интересно, действительно ли Ubuntu применима для такого сценария ...

Я хочу немного прояснить свою цель. Обычные SSD-накопители имеют встроенное программное обеспечение, которое будет поддерживать работу диска в течение длительного времени с помощью таких хитростей, как: постоянное перераспределение записей в новые сектора. У USB-флешек нет такой прошивки, поэтому использование обычной файловой системы может быстро их убить. Я смотрю, возможно ли эмулировать прошивку SSD с помощью файловой системы, предназначенной для флэш-памяти. В некотором смысле, я пытаюсь сделать так, чтобы USB-накопитель мог нормально работать с системой, как если бы это был настоящий SSD.

20
задан 13 April 2017 в 15:24

3 ответа

Используйте LVM. В этом случае можно использовать снимки - мгновенные клоны системы, таким образом, можно легко скопировать всю систему или просто переместить ее между флэш-памятью drives*.

И если требуется иметь вид "выравнивания Износа" , можно использовать aufs для корневой файловой системы на флэш-памяти usb . Таким образом, Вы не должны использовать YAFF2 и т.д., ext4 будет прекрасен.

начальная загрузка *But / необходимо будет всегда копировать вручную +, необходимо будет изменить личинка/диск UUID . Вы должны будете спасти CD в случае, если к изменяют размеры корневой объем к размеру Flash USB. И в случае, если Вы будете, повредился, личинка читала это руководство .

, которое я записал руководство для этого.

1
ответ дан 13 April 2017 в 15:24

Я хочу задать тот же вопрос и сделать точно то же самое также. Это отвечает на справку?

, Как я оптимизирую ОС для SSD?

эти ссылки также выглядят очень полезными, хотя я не могу ручаться за точность информации

http://bernaerts.dyndns.org/linux/53-debian-server-compact-flash

http://www.chrisnewland.com/using-linux-tmpfs-to-reduce-disk-writes-for-power-saving-and-longer-cf-lifespan-186

, я предполагаю, как только Вы сделали те вещи, которые необходимо будет контролировать для наблюдения то, что определенные приложения пишут в диск флэш-памяти начальной загрузки. Там какой-либо простой способ состоит в том, чтобы видеть то, что пишет в данный диск?

1
ответ дан 13 April 2017 в 15:24

Если у Вас, оказывается, есть Ubuntu в жестком диске с LVM (Сервер Ubuntu использует LVM по умолчанию).

Это пишет сценарий, был протестирован в Ubuntu Сновещательные 11,10 серверов x86_64 3.0.0 16 со следующими приложениями:

LVM version:     2.02.66(2) (2010-05-20)
Library version: 1.02.48 (2010-05-20)
Driver version:  4.20.0
grub-install (GRUB) 1.99-12ubuntu5
aufs - advanced multi layered unification filesystem. version 2.1-standalone.tree-3.0-rcN-20110620

Step1. Корневой FS уменьшения к размеру Вашего FlashDrive или меньший. Пропустите этот шаг, если Ваш корневой FS измеряет то же или меньший затем FlashDrive.

Начальная загрузка с CD Resc монтирует Ваш корневой раздел. Выполненный затем управляет:

#make the kernel realize the LVM volumes are there
lvm vgchange -a y

#Before shrinking the file system, it is good practice to check it is all in order.
# Change /dev/ubuntu/root with your root lvm partition
e2fsck -f /dev/ubuntu/root

#After the check, resize2fs can be used to shrink the file system on the LVM volume
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
resize2fs -f -p /dev/ubuntu/root 6G
#The e2fsck check command could be run again to make sure the, now significantly smaller, root file system is OK.
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
resize2fs -f -p /dev/ubuntu/root 6G

#The lvreduce command reduces the size of LVM volumes.
# Change /dev/ubuntu/root with your root lvm partition. Replace 6G with your FlashDrive capacity-500Mb
lvm lvreduce -L6G /dev/ubuntu/root

#you resided root partition !
reboot

Шаг 2. Подготовка FlashDrive: для миграции

смотрите на свой старый корневой UUID

blkid  
#it will show something like:
#/dev/sda1: UUID="6b5085da-5b7c-4ca5-a907-1e527c87a478" TYPE="ext2"
#/dev/sda2: UUID="iZjCPX-AwGS-kEmg-zXPc-Z7ne-Xd3N-gXoPQd" TYPE="LVM2_member"

#We will need /dev/sda1's UUID later. Lets remember it (6b5085da-5b7c-4ca5-a907-1e527c87a478) for the future.

# Replace /dev/sdg with your FlashDrive. All data will be last!
fdisk /dev/sdg
make first partition (sdg1) about 500Mb as ext2/ext4
make second partition (sdg2) for example 6GB as LVM partition.

#replace ubuntu with the same LVM VolumeGroup for your root fs
#Extending VG with FlashDrive
vgextend ubuntu /dev/sdg2
modprobe dm-mirror
#Moving root partition to flash drive online :)
#Replace /dev/sdg2 with your Flash Drive's second partition
#Replace /dev/sda5 with your root drive
pvmove --verbose /dev/sda5 /dev/sdg2
#removing old root drive from VolumeGroup, so we can remove HDD from PC after manipulations. But not now.
vgreduce ubuntu /dev/sda5
#Creating boot partition.
#Replace /dev/sdg1 with your Flash Drive's first partition
mkfs -t ext4 -v /dev/sdg1
#Mounting first FlashDrive partition.
mkdir /mnt/boot
#Replace /dev/sdg1 with your Flash Drive's first partition
mount /dev/sdg1 /mnt/boot

#we will need some tools
apt-get install dump
#coping boot drive from HDD to FlashDrive first partition
#Replace /dev/sda1 (source) and /mnt/boot (destination) with your environments
(dump -0f - /dev/sda1) | ( cd /mnt/boot; restore -rf - )
#And let's not forget to restore boot sector (MBR):
# Replace /dev/sdg with FlashDrive disk path
grub-install /dev/sdg

#change UUID for /boot with the one we remember at the beginning of the Step 2 (6b5085da-5b7c-4ca5-a907-1e527c87a478).
vi /etc/fstab

#now we need to write changes to grub.
update-grub

#Now you can power off your PC.
poweroff
#Now you can replace old root FS's HDD.
#Do not forget configure your PC's BIOS to boot from your FlashDrive.

A) Если Ваша личинка загрузилась, но она не делает способный загрузить ОС в первом тростнике эта статья. попробуйте команду ls для выяснения что наблюдение личинки.

grub>ls
# Replace (hd0,msdos1) regard to previous output
grub>ls (hd0,msdos1)

# Replace (hd0,msdos1)/grub regard to previous output
grub>ls (hd0,msdos1)/grub

grub>configfile (hd0,msdos1)/grub/grub.cfg

После успешной начальной загрузки изменений, не постоянных, таким образом, необходимо обновить личинку

update-grub

B) Если Вы не делаете видит личинку вообще, то используйте Спасение CD для начальной загрузки.

#and install grub
#Lets figure out new name of your FlashDrive
blkid
# Replace /dev/sda with new name of your FlashDrive which system shows you
grub-install /dev/sda
#Reboot without Rescue CD and go to point A)
reboot

Шаг 3. AUFS для корневой файловой системы на карте флэш-памяти с интерфейсом USB.

apt-get update
 apt-get dist-upgrade
 apt-get install aufs-tools


# Aufs as root with apparmor. Enter dhclient3 to complain mode
# Network interface without it wount start/
apt-get install apparmor-utils
aa-complain dhclient3
# Or disable apparmor
#/etc/init.d/apparmor stop
#update-rc.d -f apparmor remove
#aptitude remove apparmor apparmor-utils

echo aufs >> /etc/initramfs-tools/modules

Теперь создайте/etc/initramfs-tools/scripts/init-bottom / __ rootaufs файл и поместите следующий сценарий:

#!/bin/sh
#  Copyright 2008 Nicholas A. Schembri State College PA USA
#
#  This program is free software: you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation, either version 3 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program.  If not, see
#    <http://www.gnu.org/licenses/>.

# https://help.ubuntu.com/community/aufsRootFileSystemOnUsbFlash#rootaufs_Script

# Thank you Voyage Linux for the idea, http://voyage.hk/ Great job on release 0.5
#
# Tested with 8.04.1
# tested with 9.10
# tested with debian live 6.0.1
#
# ****************************************************************************************
# 
#                                 Change log
#
# 2008.08.01  Added debugging comments in "drop to a shell" section. grub option aufs=tmpfs-debug will stop the init script.
#             reviewed *********** fix fstab on tmpfs ******************
#             rootaufs failed when system was booted with /dev/xxx and fstab had uuid= info.
#             BlaYO pointed out the best and simplest solution was to use grep -v. Grep replaces a sed one liner.
#             Add the comment block to fstab
#             
# 2009.12.07 Corrected issue caused by Apparmor.
#            Name changed to __rootaufs.
# 
# 2011.08.19 Changed if condition to avoid issue (sh: bad number) when $aufsdebug is not set.
#            Now checks exists apparmor before delete.
#
# 2011.08.20 For work correctly with Debian Live 6.0.1 (http://live.debian.net/) two lines must be removed from rc.local modification part:
#             'mount -f  /ro'
#             'echo aufs-tmpfs /rw tmpfs rw 0 0 >>/etc/mtab'
#





case $1 in
prereqs)
    exit 0
    ;;
esac

export aufs

for x in $(cat /proc/cmdline); do 
    case $x in 
    root=*)
        ROOTNAME=${x#root=}
        ;;
    aufs=*)
        aufs=${x#aufs=}
        case $aufs in
        tmpfs-debug)
            aufs=tmpfs
            aufsdebug=1
            ;;
        esac    
        ;;
    esac
done


if [ "$aufs" != "tmpfs" ]; then
    #not set in boot loader 
    #I'm not loved. good bye
    exit 0
fi




# This is a simple overview of the steps needed to use aufs on the root file system and see the /rw and /ro  branches.
# initramfs init-botton script 
# move the root file system to aufs/unionfs readonly /ro
# root is mounted on ${rootmnt}
# create tmpfs on /rw
# create a aufs using /ro and /rw
# put some files on the tmpfs to fix mtab and fstab 
# move aufs to rootmnt to finish the init process.
# No changes to the root file system are made by this script.
#
#  Why!
#  This will allow you to use a usb flash drive and control what is written to the drive.
#  no need to rebuild the squashfs file just to add a program. 
#  boot to single user mode.  The system works the way you expect. boot aufs=tmpfs and no changes are written to the flash.
#  run ubuntu on an eeePC .  

# Install 
# Install ubuntu 8.04 Hardy. Hardy has aufs installed by default
# apt-get update
# apt-get dist-upgrade
# apt-get install aufs-tools
# echo aufs >> /etc/initramfs-tools/modules
# put this file in /etc/initramfs-tools/scripts/init-bottom/rootaufs
# chmod 0755 rootaufs
# # clean up menu.lst 
# update-grub
# update-initramfs -u
# vi /boot/grub/menu.lst
# add aufs=tmpfs to the default entry. 
# do not add this line to single user mode.
# boot to single user mode in order to install software. 
# note: if your home account is on the root file system, your files are in ram and not saved.
# 


echo 
echo "       root-aufs:  Setting up aufs on ${rootmnt} as root file system "
echo 

modprobe -q --use-blacklist aufs
if [ $? -ne 0 ]; then
    echo    root-aufs error:      Failed to load aufs.ko
    exit 0
fi

#make the mount points on the init root file system
mkdir /aufs
mkdir /rw
mkdir /ro

# mount the temp file system and move real root out of the way
mount -t tmpfs aufs-tmpfs /rw
mount --move ${rootmnt} /ro 
if [ $? -ne 0 ]; then
    echo    root-aufs error:    ${rootmnt}  failed to move to /ro
    exit 0
fi


mount -t aufs -o dirs=/rw:/ro=ro aufs /aufs
if [ $? -ne 0 ]; then
    echo    root-aufs error:      Failed to mount /aufs files system
    exit 0
fi


#test for mount points on aufs file system
[  -d /aufs/ro ] || mkdir /aufs/ro
[  -d /aufs/rw ] || mkdir /aufs/rw

# the real root file system is hidden on /ro of the init file system.  move it to /ro 
mount --move /ro /aufs/ro
if [ $? -ne 0 ]; then
    echo    root-aufs error:      Failed to move /ro /aufs/ro 
    exit 0
fi

# tmpfs file system is hidden on /rw
mount --move /rw /aufs/rw
if [ $? -ne 0 ]; then
    echo    root-aufs error:      Failed to move /rw /aufs/rw 
    exit 0
fi



#*********** fix fstab on tmpfs ******************
# test for /dev/sdx 
# this is not on the real file system.  This is created on the tmpfs each time the system boots.
# The init process will try to mount the root filesystem listed in fstab. / and swap must be removed.  
# the root file system must be mounted on /ro not on /

if [ "0$aufsdebug" -eq 1 ]; then
    echo  "   root-aufs debug:    Remove the root file system and swap from fstab "
    echo 
    echo 
    echo  "         ROOTNAME $ROOTNAME "
    echo  "         resume   $resume   "
    echo 
    echo  '     BlaYO pointed out that grep can be used to quickly remove '
    echo  '      the root file system from fstab. '
    echo 
    echo  '     Thank you BlaYO for the debug info.'
    echo

fi
# old code
# I'm sure that sed can do this in one step but I want to correct on the rootname  not matching the root in fstab.
#cat /aufs/ro/etc/fstab|sed -e s/$ROOTNAME/\#$ROOTNAME/ -e s/$resume/\#$resume/ >/aufs/etc/fstab  

#Add the comment block to fstab
cat <<EOF >/aufs/etc/fstab
#
#   RootAufs has mounted the root file system in ram
#
#  This fstab is in ram and the real fstab can be found /ro/etc/fstab
#  the root file system ' / ' has been removed.
#  All Swap files have been removed. 
#

EOF

#remove root and swap from fstab
cat /aufs/ro/etc/fstab|grep -v ' / ' | grep -v swap >>/aufs/etc/fstab  
if [ $? -ne 0 ]; then
    echo    root-aufs error:      Failed to create /aufs/etc/fstab 
    #exit 0
fi




# add the read only file system to fstab
#ROOTTYPE=$(/lib/udev/vol_id -t ${ROOT})
ROOTTYPE=$(cat /proc/mounts|grep ${ROOT}|cut -d' ' -f3)
ROOTOPTIONS=$(cat /proc/mounts|grep ${ROOT}|cut -d' ' -f4)
echo ${ROOT} /ro $ROOTTYPE $ROOTOPTIONS 0 0 >>/aufs/etc/fstab


# S22mount on debian systems is not mounting  /ro correctly after boot
# add to rc.local to correct what you see from df
#replace last case of exit with #exit
cat /aufs/ro/etc/rc.local|sed 's/\(.*\)exit/\1\#exit/' >/aufs/etc/rc.local  
echo mount -f  /ro >>/aufs/etc/rc.local 

# add back the root file system. mtab seems to be created by one of the init proceses. 
echo "echo aufs / aufs rw,xino=/rw/.aufs.xino,br:/rw=rw:/ro=ro 0 0 >>/etc/mtab" >>/aufs/etc/rc.local
echo "echo aufs-tmpfs /rw tmpfs rw 0 0 >>/etc/mtab" >>/aufs/etc/rc.local 
echo exit 0 >>/aufs/etc/rc.local 

#  Copyright 2008 Joaquin I. Bogado Garcia
#fix para apparmor, se desactiva y listo ( From the lethe project. )
[ -e /scripts/init-bottom/_apparmor ] && rm /scripts/init-bottom/_apparmor
[ -e /aufs/etc/init.d/apparmor ] && rm /aufs/etc/init.d/apparmor


#build remountrw
echo \#!/bin/sh >/aufs/bin/remountrw
echo mount -o remount,rw ${ROOT} >>/aufs/bin/remountrw
chmod 0700 /aufs/bin/remountrw

#build remountro
echo \#!/bin/sh >/aufs/bin/remountro
echo mount -o remount,ro ${ROOT} >>/aufs/bin/remountro
chmod 0700 /aufs/bin/remountro

# This should drop to a shell. (rewrite)
if [ "0$aufsdebug" -eq 1 ]; then
    echo
    echo "   root-aufs debug:    mount --move /aufs ${rootmnt} "
    echo 
    echo '   root-aufs debug:   init will stop here.   '
    echo  
    exit 0
fi

mount --move /aufs ${rootmnt}

exit 0

После того, как мы должны изменить полномочия для этого файла:

chmod 0755 /etc/initramfs-tools/scripts/init-bottom/rootaufs

Шаг 4. Изменение GRUB2.

cat /etc/grub.d/10_linux|sed  s/'linux_entry "${OS}" "${version}" false'/'linux_entry "RO: ${OS}" "${version}" false'/ |sed  s/'"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_EXTRA} ${GRUB_CMDLINE_LINUX_DEFAULT}"'/'"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_EXTRA} ${GRUB_CMDLINE_LINUX_DEFAULT} aufs=tmpfs"'/ >/etc/grub.d/06_custom

sed -i.orig -e \
"/{GRUB_DISABLE_RECOVERY}\" != \"xtrue\" ]; then/s/^.*$/    \
if [ 0 ]; then/" \
/etc/grub.d/06_custom


sed -i.orig -e \
"/in_submenu=:/s/^.*$/    \
/" \
/etc/grub.d/06_custom

sed -i.orig -e \
"/\"Previous Linux versions/s/^.*$/    \
echo ''/" \
/etc/grub.d/06_custom

rm /etc/grub.d/06_custom.orig

chmod 755 /etc/grub.d/06_custom

update-grub
update-initramfs -u
4
ответ дан 13 April 2017 в 15:24

Другие вопросы по тегам:

Похожие вопросы: