Всплеск температуры процессора на 90°C+ только при подключении

My Asus Vivobook K571GT с двойной загрузкой в ​​Ubuntu 20.04 недавно начал отключаться из-за высокой температуры (достигающей 99 градусов по Цельсию). Эти температуры достигаются только тогда, когда ноутбук подключен к сети.

BIOS обновлен до последней версии, ядро ​​Ubuntu обновлено до последней версии. Я видел, что это может быть связано с неправильно установленным драйвером nvidia, поэтому я попробовал несколько разных драйверов nvidia (460, 470 и 495). Пробовал вообще отключать nvdia, работающую только с интегрированным GPU. Все они имели одинаковые результаты, когда температура резко возросла с приличных 40-45°C до 95°C за секунду (без такой большой нагрузки на ЦП, т.е. выполнение команды apt update приведет к повышению температуры ЦП до 90c+), если я не остановлю то, что делаю, или запустится команда, и я не смогу остановить ее вовремя, процессор достигнет отметки 100c, что вызовет отключение. Интересно, что если я отключу его от сети, когда получу предупреждение о высокой температуре, температура снова упадет до 45-50 градусов за секунду.

Кто-нибудь сталкивался с чем-то подобным? Единственное, что я могу придумать для быстрого скачка температуры процессора при подключении, но не от батареи, - это то, что процессор каким-то образом «разгоняется». Я не уверен, как я могу это проверить, и если это каким-то образом, как предотвратить это? Аппаратная проблема, например адаптер переменного тока, обеспечивающий слишком большую мощность?

Редактировать

grep . /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu10/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu11/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu4/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu5/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu6/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu7/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu8/cpufreq/scaling_driver:intel_pstate
/sys/devices/system/cpu/cpu9/cpufreq/scaling_driver:intel_pstate

grep ./sys/devices/system/cpu/cpu*/cpufreq/scaling_Governor

/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu10/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu11/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu4/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu5/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu6/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu7/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu8/cpufreq/scaling_governor:powersave
/sys/devices/system/cpu/cpu9/cpufreq/scaling_governor:powersave

grep "название модели" /proc/cpuinfo

model name  : Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz

cat /sys/devices/system/cpu/intel_pstate/no_turbo

0

Изменить

пс доп | grep -i therm

root         167  0.0  0.0      0     0 ?        I<   10:18   0:00 acpi_thermal_pm
root        1049  0.0  0.0 128808  9456 ?        Ssl  10:18   0:00 thermald

sudo dmidecode -s bios-version

X571GT.311

ls -al /etc/thermald

total 28
drwxr-xr-x   2 root root  4096 Sep  8 13:48 .
drwxr-xr-x 148 root root 12288 Nov  2 12:01 ..
-rw-r--r--   1 root root  4605 Jan 14  2019 thermal-conf.xml
-rw-r--r--   1 root root   508 Jan 14  2019 thermal-cpu-cdev-order.xml

Ноутбуку всего год или два. Последнее обновление BIOS было выпущено всего пару недель назад.

cat /etc/thermald/thermal-conf.xml

<?xml version="1.0"?>

<!--
use "man thermal-conf.xml" for details
-->

<!-- BEGIN -->
<ThermalConfiguration>
<Platform>
    <Name>Generic X86 Laptop Device</Name>
    <ProductName>EXAMPLE_SYSTEM</ProductName>
    <Preference>QUIET</Preference>
    <ThermalSensors>
        <ThermalSensor>
            <Type>TSKN</Type>
            <AsyncCapable>1</AsyncCapable>
        </ThermalSensor>
    </ThermalSensors>
    <ThermalZones>
        <ThermalZone>
            <Type>SKIN</Type>
            <TripPoints>
                <TripPoint>
                    <SensorType>TSKN</SensorType>
                    <Temperature>55000</Temperature>
                    <type>passive</type>
                    <ControlType>SEQUENTIAL</ControlType>
                    <CoolingDevice>
                        <index>1</index>
                        <type>rapl_controller</type>
                        <influence> 100 </influence>
                        <SamplingPeriod> 16 </SamplingPeriod>
                    </CoolingDevice>
                    <CoolingDevice>
                        <index>2</index>
                        <type>intel_powerclamp</type>
                        <influence> 100 </influence>
                        <SamplingPeriod> 12 </SamplingPeriod>
                    </CoolingDevice>
                </TripPoint>
            </TripPoints>
        </ThermalZone>
    </ThermalZones>
</Platform>

<!-- Thermal configuration example only -->
<Platform>
    <Name>Example Platform Name</Name>
    <!--UUID is optional, if present this will be matched -->
    <!-- Both product name and UUID can contain
        wild card "*", which matches any platform
     -->
    <UUID>Example UUID</UUID>
    <ProductName>Example Product Name</ProductName>
    <Preference>QUIET</Preference>
    <ThermalSensors>
        <ThermalSensor>
            <!-- New Sensor with a type and path -->
            <Type>example_sensor_1</Type>
            <Path>/some_path</Path>
            <AsyncCapable>0</AsyncCapable>
        </ThermalSensor>
        <ThermalSensor>
            <!-- Already present in thermal sysfs,
                enable this or add/change config
                For example, here we are indicating that
                sensor can do async events to avoid polling
            -->
            <Type>example_thermal_sysfs_sensor</Type>
            <!-- If async capable, then we don't need to poll -->
            <AsyncCapable>1</AsyncCapable>
        </ThermalSensor>
        <ThermalSensor>
            <!-- Examle of a virtual sensor. This sensor
                depends on other real sensor or
                virtual sensor.
                E.g. here the temp will be
                 temp of example_sensor_1 * 0.5 + 10
            -->
            <Type>example_virtual_sensor</Type>
            <Virtual>1</Virtual>
            <SensorLink>
                <SensorType>example_sensor_1</SensorType>
                <Multiplier> 0.5 </Multiplier>
                <Offset> 10 </Offset>
            </SensorLink>
        </ThermalSensor>

    </ThermalSensors>
    <ThermalZones>
        <ThermalZone>
            <Type>Example Zone type</Type>
            <TripPoints>
                <TripPoint>
                    <SensorType>example_sensor_1</SensorType>
                    <!-- Temperature at which to take action -->
                    <Temperature> 75000 </Temperature>
                    <!-- max/passive/active
                        If a MAX type is specified, then
                        daemon will use PID control
                        to aggresively throttle to avoid
                        reaching this temp.
                     -->
                    <type>max</type>
                    <!-- SEQUENTIAL | PARALLEL
                    When a trip point temp is violated, then
                    number of cooling device can be activated.
                    If control type is SEQUENTIAL then
                    It will exhaust first cooling device before trying
                    next.
                    -->
                    <ControlType>SEQUENTIAL</ControlType>
                    <CoolingDevice>
                        <index>1</index>
                        <type>example_cooling_device</type>
                        <!-- Influence will be used order cooling devices.
                            First cooling device will be used, which has
                            highest influence.
                        -->
                        <influence> 100 </influence>
                        <!-- Delay in using this cdev, this takes some time
                        too actually cool a zone
                        -->
                        <SamplingPeriod> 12 </SamplingPeriod>
                    </CoolingDevice>
                </TripPoint>

            </TripPoints>
        </ThermalZone>
    </ThermalZones>
    <CoolingDevices>
        <CoolingDevice>
            <!--
                Cooling device can be specified
                by a type and optionally a sysfs path
                If the type already present in thermal sysfs
                no need of a path.
                Compensation can use min/max and step size
                to increasing cool the system.
                Debounce period can be used to force
                a waiting period for action
            -->
            <Type>example_cooling_device</Type>
            <MinState>0</MinState>
            <IncDecStep>10</IncDecStep>
            <ReadBack> 0 </ReadBack>
            <MaxState>50</MaxState>
            <DebouncePeriod>5000</DebouncePeriod>
            <!--
                If there are no PID parameter
                compensation increase step wise and exponentaially
                if single step is not able to change trend.
                Alternatively a PID parameters can be specified
                then next step will use PID calculation using
                provided PID constants.
            -->>
            <PidControl>
                <kp>0.001</kp>
                <kd>0.0001</kd>
                <ki>0.0001</ki>
            </PidControl>
        </CoolingDevice>
    </CoolingDevices>
</Platform>
</ThermalConfiguration>
<!-- END -->

top

top - 13:16:27 up  1:37,  1 user,  load average: 0.85, 1.32, 1.11
Tasks: 487 total,   2 running, 484 sleeping,   1 stopped,   0 zombie
%Cpu(s):  5.1 us,  2.0 sy,  1.5 ni, 90.6 id,  0.1 wa,  0.0 hi,  0.7 si,  0.0 st
GiB Mem :     15.5 total,      4.5 free,      5.0 used,      5.9 buff/cache
GiB Swap:      2.0 total,      2.0 free,      0.0 used.     10.1 avail Mem 

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND                       
  35883 root      39  19   84636  68132  12616 R  19.8   0.4   0:00.60 apt-check                     
   4842 haleks    20   0 4487900 483220 120988 S   2.6   3.0   1:49.49 gnome-shell                   
   7291 haleks    20   0  923372  60172  45804 S   2.3   0.4   1:34.25 psensor                       
  32705 haleks    20   0   24.5g 130676  77652 S   2.3   0.8   0:14.20 brave                         
    975 message+  20   0   40380  34872   4068 S   1.0   0.2   0:31.14 dbus-daemon                   
   1002 root      20   0 2332860  32620  16456 S   1.0   0.2   0:05.98 snapd                         
   4555 haleks    20   0   24.7g 147872  79744 S   1.0   0.9   1:10.25 Xorg                          
   5229 haleks    20   0 2258744 131912  45796 S   1.0   0.8   1:16.97 keybase                       
  35782 root      20   0  287276  16044  14104 S   1.0   0.1   0:00.03 packagekitd                   
    663 root     -51   0       0      0      0 S   0.7   0.0   0:38.09 irq/152-nvidia                
  21473 haleks    20   0  819496  53768  39012 S   0.7   0.3   0:07.86 gnome-terminal-               
  32564 haleks    20   0   16.6g 410380 190120 S   0.7   2.5   0:42.65 brave                         
  32596 haleks    20   0   16.6g 182632  87372 S   0.7   1.1   0:47.20 brave                         
  34076 root      20   0   25368  13280   7900 S   0.7   0.1   0:00.16 apt                           
    357 root      19  -1   68944  30764  29000 S   0.3   0.2   0:01.12 systemd-journal               
    387 root      20   0   24164   7796   4236 S   0.3   0.0   0:02.20 systemd-udevd                 
    517 root     -51   0       0      0      0 S   0.3   0.0   0:00.73 irq/148-iwlwifi               
    992 root      20   0  235188  10276   6928 S   0.3   0.1   0:02.17 polkitd                       
   1065 root      20   0  716580  12360   9072 S   0.3   0.1   0:01.60 canonical-livep               
   1349 gdm       20   0  317300   9004   7968 S   0.3   0.1   0:00.28 goa-identity-se               
   1864 root      20   0 2432052 150584  31964 S   0.3   0.9   0:07.40 lxd                           
   4545 haleks    20   0    8748   5860   4012 S   0.3   0.0   0:01.37 dbus-daemon                   
   5448 haleks    20   0 2370936 172572  33964 S   0.3   1.1   0:27.26 kbfsfuse                      
   7473 haleks    20   0  503408 143448  66476 S   0.3   0.9   0:35.84 Keybase                       
   7575 haleks    20   0  463344  40076  32528 S   0.3   0.2   0:00.39 update-notifier               
  10111 haleks    20   0  582224 166968  80480 S   0.3   1.0   0:37.21 gitkraken                     
  32662 haleks    20   0   24.4g 121680  81520 S   0.3   0.7   0:03.68 brave                         
  35783 root      20   0   24164   5228   1652 S   0.3   0.0   0:00.01 systemd-udevd                 
  35784 root      20   0   24164   5228   1652 S   0.3   0.0   0:00.01 systemd-udevd                 
  35786 root      20   0   24164   5228   1652 S   0.3   0.0   0:00.01 systemd-udevd                 
      1 root      20   0  168176  12092   8296 S   0.0   0.1   0:08.88 systemd                       
      2 root      20   0       0      0      0 S   0.0   0.0   0:00.02 kthreadd                      
      3 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_gp                        
      4 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_par_gp                    
      6 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/0:0H-kblockd          
      9 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 mm_percpu_wq                  
     10 root      20   0       0      0      0 S   0.0   0.0   0:00.11 ksoftirqd/0                   
     11 root      20   0       0      0      0 I   0.0   0.0   0:09.66 rcu_sched                     
     12 root      rt   0       0      0      0 S   0.0   0.0   0:00.02 migration/0                   
     13 root     -51   0       0      0      0 S   0.0   0.0   0:00.00 idle_inject/0                 
     14 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/0                       
     15 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/1                       
     16 root     -51   0       0      0      0 S   0.0   0.0   0:00.00 idle_inject/1                 
     17 root      rt   0       0      0      0 S   0.0   0.0   0:00.18 migration/1                   
     18 root      20   0       0      0      0 S   0.0   0.0   0:00.06 ksoftirqd/1                   
1
задан 3 November 2021 в 13:49

0 ответов

Другие вопросы по тегам:

Похожие вопросы: