Я установил Ubuntu 16.04 рядом с Windows 10 (200 ГБ для Windows и 100 ГБ для Ubuntu). Полагаю, при установке я сделал ошибку. Ubuntu загружается отлично, и я могу выполнять все задачи в Ubuntu, но он загружается без отображения меню GRUB. Я не хочу устанавливать снова и снова, чтобы выполнить двойную загрузку. Как я могу получить GRUB, чтобы я мог загрузиться в Windows 10 без потери Ubuntu?
Я не перезапускаю Ubuntu, потому что сейчас я не хочу потерять Ubuntu.
Приведенный ниже пример похож, но я боюсь попробовать этот. Меню Grub, не появившееся после переустановки и загрузки, пытается выполнить вышеприведенный ответ, не работает. Ниже приведены команды, которые я ввел и вывод.
root@ubox:/home/AIR# update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-4.10.0-28-generic.efi.signed
Found kernel: /boot/vmlinuz-4.10.0-28-generic
Found kernel: /boot/vmlinuz-4.4.0-112-generic
Found kernel: /boot/memtest86+.bin
Found kernel: /boot/vmlinuz-4.10.0-28-generic.efi.signed
Found kernel: /boot/vmlinuz-4.10.0-28-generic
Found kernel: /boot/vmlinuz-4.4.0-112-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done
root@ubox:/home/AIR# apt-get install --reinstall grub
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
grub-efi-amd64-bin shim
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 19 not upgraded.
Need to get 0 B/196 kB of archives.
After this operation, 0 B of additional disk space will be used.
Preconfiguring packages ...
(Reading database ... 224798 files and directories currently installed.)
Preparing to unpack .../grub_0.97-29ubuntu68_amd64.deb ...
Unpacking grub (0.97-29ubuntu68) over (0.97-29ubuntu68) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up grub (0.97-29ubuntu68) ...
root@ubox:/home/AIR# grub-install
install_device not specified.
Usage: grub-install [OPTION] install_device
Install GRUB on your drive.
-h, --help print this message and exit
-v, --version print the version information and exit
--root-directory=DIR install GRUB images under the directory DIR
instead of the root directory
--grub-shell=FILE use FILE as the grub shell
--no-floppy do not probe any floppy drive
--force-lba force GRUB to use LBA mode even for a buggy
BIOS
--recheck probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by
--root-directory, and uses the grub shell to install grub into the boot
sector.
Report bugs to <bug-grub@gnu.org>.
root@ubox:/home/AIR# update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
Searching for splash image ... none found, skipping ...
Found kernel: /boot/vmlinuz-4.10.0-28-generic.efi.signed
Found kernel: /boot/vmlinuz-4.10.0-28-generic
Found kernel: /boot/vmlinuz-4.4.0-112-generic
Found kernel: /boot/memtest86+.bin
Found kernel: /boot/vmlinuz-4.10.0-28-generic.efi.signed
Found kernel: /boot/vmlinuz-4.10.0-28-generic
Found kernel: /boot/vmlinuz-4.4.0-112-generic
Found kernel: /boot/memtest86+.bin
Updating /boot/grub/menu.lst ... done
root@ubox:/home/AIR# cat /boot/grub/menu.ls
cat: /boot/grub/menu.ls: No such file or directory
root@ubox:/home/AIR# cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 16.04.3 LTS, kernel 4.10.0-28-generic.efi.signed
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro quiet splash
title Ubuntu 16.04.3 LTS, kernel 4.10.0-28-generic.efi.signed (recovery mode)
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro single
title Ubuntu 16.04.3 LTS, kernel 4.10.0-28-generic
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.10.0-28-generic root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro quiet splash
initrd /boot/initrd.img-4.10.0-28-generic
title Ubuntu 16.04.3 LTS, kernel 4.10.0-28-generic (recovery mode)
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.10.0-28-generic root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro single
initrd /boot/initrd.img-4.10.0-28-generic
title Ubuntu 16.04.3 LTS, kernel 4.4.0-112-generic
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.4.0-112-generic root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro quiet splash
initrd /boot/initrd.img-4.4.0-112-generic
title Ubuntu 16.04.3 LTS, kernel 4.4.0-112-generic (recovery mode)
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/vmlinuz-4.4.0-112-generic root=UUID=abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0 ro single
initrd /boot/initrd.img-4.4.0-112-generic
title Ubuntu 16.04.3 LTS, memtest86+
uuid abd3a19c-fed3-4cb7-98e3-63fd5c07ccf0
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
Существует прямая команда bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi для отображения меню grub при загрузке, но для выполнения вам нужен доступ к ОС Windows.
Шаги:
Загрузка в Windows ОС Объедините Windows + r вместе и введите cmd, чтобы открыть командную строку. Введите bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi и нажмите enterPS: Чтобы получить двойную загрузку, отлично работающую на моем ноутбуке dell, я воспользовался этими двумя файлами с двойной загрузкой и ubuntu, и я также выполнил следующие шаги для настройки меню grub и это сработало.
Кроме того, решение, указанное как право в вашей ссылке, работает. Итак, попробуйте. Если вы получите доступ к grub, через который вы можете загрузиться в окна, а затем выполните описанные выше шаги, чтобы быть в безопасности.
Существует прямая команда bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi для отображения меню grub при загрузке, но для выполнения вам нужен доступ к ОС Windows.
Шаги:
Загрузка в Windows ОС Объедините Windows + r вместе и введите cmd, чтобы открыть командную строку. Введите bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi и нажмите enterPS: Чтобы получить двойную загрузку, отлично работающую на моем ноутбуке dell, я воспользовался этими двумя файлами с двойной загрузкой и ubuntu, и я также выполнил следующие шаги для настройки меню grub и это сработало.
Кроме того, решение, указанное как право в вашей ссылке, работает. Итак, попробуйте. Если вы получите доступ к grub, через который вы можете загрузиться в окна, а затем выполните описанные выше шаги, чтобы быть в безопасности.
Существует прямая команда bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi для отображения меню grub при загрузке, но для выполнения вам нужен доступ к ОС Windows.
Шаги:
Загрузка в Windows ОС Объедините Windows + r вместе и введите cmd, чтобы открыть командную строку. Введите bcdedit /set "{bootmgr}" path \EFI\ubuntu\grubx64.efi и нажмите enterPS: Чтобы получить двойную загрузку, отлично работающую на моем ноутбуке dell, я воспользовался этими двумя файлами с двойной загрузкой и ubuntu, и я также выполнил следующие шаги для настройки меню grub и это сработало.
Кроме того, решение, указанное как право в вашей ссылке, работает. Итак, попробуйте. Если вы получите доступ к grub, через который вы можете загрузиться в окна, а затем выполните описанные выше шаги, чтобы быть в безопасности.