Openvpn: Не удалось разрешить имя DNS

Я установил сервер OpenVPN на удаленном облачном сервере и настроил все маршруты на dnsmasq, который находится на том же сервере OpenVPN. Затем я загрузил все ca и клиентские ключи в свой локальный ноутбук. Когда ноутбук подключен к удаленному серверу OpenVPN, я буду использовать DNS-сервер на сервере OpenVPN, а затем все сетевое подключение будет осуществляться через сервер OpenVPN.

Все работает ТОЛЬКО, когда у меня дома. Однако, когда я переехал в другое место (например, в университетский офис), все веб-сайты не могли отображаться. Для exmaple ping www.google.com на консоли производит сбой, а ping его IP-адрес в порядке.

hijiex@shijie-ThinkPad-T410:/other/dropxbox/Dropbox/project/IPRent/aliyun-us$ ping www.google.com ping: unknown host www.google.com shijiex@shijie-ThinkPad-T410:/other/dropxbox/Dropbox/project/IPRent/aliyun-us$ ping 199.212.24.179 (google's IP) PING 199.212.24.179 (199.212.24.179) 56(84) bytes of data. 64 bytes from 199.212.24.179: icmp_seq=1 ttl=51 time=294 ms shijiex@shijie-ThinkPad-T410:/other/projectbase/dacapo/benchmarks/bms/batik/src/org/dacapo/harness$ ping 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=38.0 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=37.7 ms

client.conf -

############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 47.90.206.48 1194 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nogroup # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ca.crt cert aliyun-us.crt key aliyun-us.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20

Я проверил сервер и все еще там. Когда я переместил ноутбук обратно в дом, он снова работает.

Консоль клиента:

Mon Apr 3 14:41:00 2017 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Apr 3 14:41:00 2017 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Apr 3 14:41:00 2017 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Apr 3 14:41:00 2017 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Apr 3 14:41:00 2017 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Mon Apr 3 14:41:00 2017 [server] Peer Connection Initiated with [AF_INET]47.90.206.48:1194 Mon Apr 3 14:41:03 2017 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Mon Apr 3 14:41:05 2017 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Mon Apr 3 14:41:05 2017 OPTIONS IMPORT: timers and/or timeouts modified Mon Apr 3 14:41:05 2017 OPTIONS IMPORT: --ifconfig/up options modified Mon Apr 3 14:41:05 2017 OPTIONS IMPORT: route options modified Mon Apr 3 14:41:05 2017 ROUTE_GATEWAY 131.202.102.1/255.255.255.0 IFACE=wlan0 HWADDR=00:23:14:40:24:84 Mon Apr 3 14:41:05 2017 TUN/TAP device tun0 opened Mon Apr 3 14:41:05 2017 TUN/TAP TX queue length set to 100 Mon Apr 3 14:41:05 2017 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Apr 3 14:41:05 2017 /sbin/ip link set dev tun0 up mtu 1500 Mon Apr 3 14:41:05 2017 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5 Mon Apr 3 14:41:05 2017 /sbin/ip route add 47.90.206.48/32 via 131.202.102.1 Mon Apr 3 14:41:05 2017 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5 Mon Apr 3 14:41:05 2017 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5 Mon Apr 3 14:41:05 2017 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5 Mon Apr 3 14:41:05 2017 Initialization Sequence Completed

Обновлен VPN server.conf:

# Which local IP address should OpenVPN # listen on? (optional) ;local a.b.c.d # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca ca.crt cert server.crt key server.key # This file should be kept secret # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh2048.pem 2048 dh dh2048.pem # Network topology # Should be subnet (addressing via IP) # unless Windows clients v2.0.9 and lower have to # be supported (then net30, i.e. a /30 per client) # Defaults to net30 (not recommended) ;topology subnet # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow different # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nogroup # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 ;push "redirect-gateway def1" push "dhcp-option DNS 10.8.0.1" push "redirect-gateway def1 bypass-dhcp" ;push "redirect-gateway def1"

/etc/rc.local:

#!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j REJECT iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE service dnsmasq restart exit 0

и /etc/sysctl.conf: net.ipv4.ip_forward=1

Я также настроил правила пересылки IP на стороне сервера.

Спасибо

0
задан 5 April 2017 в 20:51

5 ответов

раскомментируйте строки (которые уже существуют в вашем файле server.conf в строке 111), удалив в вашем файле server.conf полутол (;):

# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"

.

Как правило, ваш DNS, вероятно, был предоставлен вашим маршрутизатором.

Обратите внимание: вам следует выбрать сеть 10.x.x.x, отличную от вашего удаленного сайта. В противном случае все будет замешано. 1) У вашего обновленного файла server.conf все еще есть точки с запятой - удалите их. 2) Когда вы даете шаблон, используйте его, не скрестите строки вокруг, если не знаете, что не вызовет проблем. Раскомментируйте dhcp = -redirect, а не просто добавьте его в конец - я не знаю, может ли он следовать линиям опций dhpc или нет, но изменить минимум, чтобы устранить возможные проблемы. 3) Снимите; на линии tls-auth tls-auth ta.key 0 # Этот файл является секретным 4) Добавьте ключевое направление 0 сразу после строки tls-auth. 5) Для клиентов Ubuntu раскомментируйте пользователя и группу. как server.conf и client.conf. Если вы пытаетесь настроить клиент Windows, вы спрашиваете не на том сайте.

1
ответ дан 23 May 2018 в 00:01
  • 1
    Вы хотите добавить две предоставленные конфигурации в server.conf? Не могли бы вы объяснить, почему в моем доме все в порядке, а неизвестная ошибка хоста при переходе в офис? благодаря – Xu Shijie 4 April 2017 в 04:02
  • 2
    Я согласен, что вам нужно это сделать. Таким образом, ваш клиент будет использовать серверы OpenDNS. – Organic Marble 4 April 2017 в 04:48
  • 3
    Спасибо, оба. Раскомментируйте два push dhcp-options, см. Обновленный server.conf. Затем перезапустите openvpn и dnsmq в порядке. Но проблема все еще есть: мой браузер не мог показывать какие-либо страницы во время работы. – Xu Shijie 5 April 2017 в 20:54

раскомментируйте строки (которые уже существуют в вашем файле server.conf в строке 111), удалив в вашем файле server.conf полутол (;):

# DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220"

.

Как правило, ваш DNS, вероятно, был предоставлен вашим маршрутизатором.

Обратите внимание: вам следует выбрать сеть 10.x.x.x, отличную от вашего удаленного сайта. В противном случае все будет замешано. 1) У вашего обновленного файла server.conf все еще есть точки с запятой - удалите их. 2) Когда вы даете шаблон, используйте его, не скрестите строки вокруг, если не знаете, что не вызовет проблем. Раскомментируйте dhcp = -redirect, а не просто добавьте его в конец - я не знаю, может ли он следовать линиям опций dhpc или нет, но изменить минимум, чтобы устранить возможные проблемы. 3) Снимите; на линии tls-auth tls-auth ta.key 0 # Этот файл является секретным 4) Добавьте ключевое направление 0 сразу после строки tls-auth. 5) Для клиентов Ubuntu раскомментируйте пользователя и группу. как server.conf и client.conf. Если вы пытаетесь настроить клиент Windows, вы спрашиваете не на том сайте.

1
ответ дан 18 July 2018 в 15:35

раскомментируйте строки (которые уже существуют в вашем файле server.conf в строке 111), удалив в вашем файле server.conf полутол (;):

# DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220"

.

Как правило, ваш DNS, вероятно, был предоставлен вашим маршрутизатором.

Обратите внимание: вам следует выбрать сеть 10.x.x.x, отличную от вашего удаленного сайта. В противном случае все будет замешано. 1) У вашего обновленного файла server.conf все еще есть точки с запятой - удалите их. 2) Когда вы даете шаблон, используйте его, не скрестите строки вокруг, если не знаете, что не вызовет проблем. Раскомментируйте dhcp = -redirect, а не просто добавьте его в конец - я не знаю, может ли он следовать линиям опций dhpc или нет, но изменить минимум, чтобы устранить возможные проблемы. 3) Снимите; на линии tls-auth tls-auth ta.key 0 # Этот файл является секретным 4) Добавьте ключевое направление 0 сразу после строки tls-auth. 5) Для клиентов Ubuntu раскомментируйте пользователя и группу. как server.conf и client.conf. Если вы пытаетесь настроить клиент Windows, вы спрашиваете не на том сайте.

1
ответ дан 24 July 2018 в 20:40

раскомментируйте строки (которые уже существуют в вашем файле server.conf в строке 111), удалив в вашем файле server.conf полутол (;):

# DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220"

.

Как правило, ваш DNS, вероятно, был предоставлен вашим маршрутизатором.

Обратите внимание: вам следует выбрать сеть 10.x.x.x, отличную от вашего удаленного сайта. В противном случае все будет замешано. 1) У вашего обновленного файла server.conf все еще есть точки с запятой - удалите их. 2) Когда вы даете шаблон, используйте его, не скрестите строки вокруг, если не знаете, что не вызовет проблем. Раскомментируйте dhcp = -redirect, а не просто добавьте его в конец - я не знаю, может ли он следовать линиям опций dhpc или нет, но изменить минимум, чтобы устранить возможные проблемы. 3) Снимите; на линии tls-auth tls-auth ta.key 0 # Этот файл является секретным 4) Добавьте ключевое направление 0 сразу после строки tls-auth. 5) Для клиентов Ubuntu раскомментируйте пользователя и группу. как server.conf и client.conf. Если вы пытаетесь настроить клиент Windows, вы спрашиваете не на том сайте.

1
ответ дан 31 July 2018 в 23:41

раскомментируйте строки (которые уже существуют в вашем файле server.conf в строке 111), удалив в вашем файле server.conf значение «двоеточие» (;):

# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"

.

Как правило, ваш DNS, вероятно, был предоставлен вашим маршрутизатором.


Обратите внимание: вам следует выбрать сеть 10.x.x.x, отличную от вашего удаленного сайта. В противном случае все будет замешано. 1) У вашего обновленного файла server.conf все еще есть точки с запятой - удалите их. 2) Когда вы даете шаблон, используйте его, не скрестите строки вокруг, если не знаете, что не вызовет проблем. Раскомментируйте dhcp = -redirect, а не просто добавьте его в конец - я не знаю, может ли он следовать линиям опций dhpc или нет, но изменить минимум, чтобы устранить возможные проблемы. 3) Снимите; на линии tls-auth tls-auth ta.key 0 # Этот файл является секретным 4) Добавьте ключевое направление 0 сразу после строки tls-auth. 5) Для клиентов Ubuntu раскомментируйте пользователя и группу. как server.conf и client.conf. Если вы пытаетесь настроить клиент Windows, вы спрашиваете не на том сайте.

1
ответ дан 9 August 2018 в 03:09

Другие вопросы по тегам:

Похожие вопросы: