Проблема в конфигурации Micromax MMX 355G в Ubuntu 12.04

Привет! Я получил ошибку на последнем шаге. Я использую Micromax MMX 355g 3G модем HSPA 7,2 Мбит / с. Конфигурация будет очень сложной, и обнаружение водителя также затруднено. Я только что сделал вышеописанные шаги в порядке до modprobe утверждение и, наконец, утверждение: usb_modeswitch -c /etc/usb_modeswitch.d/1dbc:0669. Я получил сообщение об ошибке: драйвер не найден, но драйвер USB-накопителя найден и идентификатор продукта также найден:

Looking for target devices ...
   found matching product ID
   adding device
 Found devices in target mode or class (1)
Looking for default devices ...
   found matching product ID
   adding device
 Found device in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
 OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x87 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
 OK, driver found ("usb-storage")
 OK, driver "usb-storage" detached
 Could not send INQUIRY message (error -2)

USB description data (for identification)
-------------------------
Manufacturer: HSPA
     Product: HSPA
  Serial No.: 8444311594054030
-------------------------
Looking for active driver ...
 No driver found. Either detached before or never attached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
 Sending the message returned error -2. Trying to continue
Resetting response endpoint 0x87
Resetting message endpoint 0x01
 Could not reset endpoint (probably harmless): -2
-> Run lsusb to note any changes. Bye.
0
задан 17 May 2013 в 14:46

1 ответ

Откройте терминал путем нажатия Ctrl+Alt+T и напишите этот код:-

sudo gedit /etc/modules

Нажмите Enter

Это попросит Ваш пароль, поместит его и нажмет Enter

затем запишите эти строки

usbserial нажмите Enter

option нажмите Enter

Сохраните файл и близко gedit.

Теперь перезапустите свою систему.

После него открывают терминал путем нажатия Ctrl+Alt+T и записи

sudo modprobe usbserialвойдите,

дайте свой пароль, нажмите Enter, затем вводят

sudo modprobe optionнажмите Enter.

  • Закройте терминал.
  • Теперь подключите свой модем с USB-портом.
  • Ожидайте немногих вторых, и Вы сделаны.
1
ответ дан 17 May 2013 в 14:46

Другие вопросы по тегам:

Похожие вопросы: