Я пытающийся настроить шмеля на человечности 12.04. Я также использующий последний драйвер Nvidia, потому что 319 больше не доступно.
Это - мои конфигурационные файлы:
/etc/bumblebee/bumblebee.conf:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-331-updates
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-331-updates:/usr/lib32/nvidia-331-updates
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-331-updates/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
Затем я показываю, что Вы связываете мистические вещи:
Первая команда:
$ sudo /usr/sbin/bumblebeed -vv
[ 4828.053052] [DEBUG]Found card: 01:00.0 (discrete)
[ 4828.053093] [DEBUG]Found card: 00:02.0 (integrated)
[ 4828.053103] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4828.053656] [INFO]Configured driver: nvidia
[ 4828.053678] [DEBUG]Skipping auto-detection, using configured driver 'nvidia '
[ 4828.053743] [DEBUG]bbswitch has been detected.
[ 4828.053753] [INFO]Switching method 'bbswitch' is available and will be used.
[ 4828.053762] [DEBUG]Active configuration:
[ 4828.053770] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4828.053778] [DEBUG] X display: :8
[ 4828.053786] [DEBUG] LD_LIBRARY_PATH:
[ 4828.053794] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4828.053802] [DEBUG] pidfile: /var/run/bumblebeed.pid
[ 4828.053810] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.DRIVER
[ 4828.053818] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[ 4828.053826] [DEBUG] ModulePath:
[ 4828.053833] [DEBUG] GID name: bumblebee
[ 4828.053841] [DEBUG] Power method: auto
[ 4828.053849] [DEBUG] Stop X on exit: 1
[ 4828.053857] [DEBUG] Driver: nvidia
[ 4828.053865] [DEBUG] Driver module: nvidia
[ 4828.053872] [DEBUG] Card shutdown state: 1
[ 4828.054045] [DEBUG]Process /sbin/modprobe started, PID 3031.
[ 4828.054143] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 4828.056711] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 4828.056777] [ERROR]Module 'nvidia ' is not found.
Вторая команда:
$ sudo /usr/sbin/bumblebeed -vv --driver nvidia
[ 4742.214895] [DEBUG]Found card: 01:00.0 (discrete)
[ 4742.214970] [DEBUG]Found card: 00:02.0 (integrated)
[ 4742.215000] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4742.215609] [INFO]Configured driver: nvidia
[ 4742.215660] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[ 4742.215885] [DEBUG]Process /sbin/modprobe started, PID 3023.
[ 4742.215981] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 4742.218520] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 4742.218667] [DEBUG]bbswitch has been detected.
[ 4742.218730] [INFO]Switching method 'bbswitch' is available and will be used.
[ 4742.218769] [DEBUG]Active configuration:
[ 4742.218805] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4742.218834] [DEBUG] X display: :8
[ 4742.218871] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-331-updates:/usr/lib32/nvidia-331-updates
[ 4742.218908] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4742.218949] [DEBUG] pidfile: /var/run/bumblebeed.pid
[ 4742.218981] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[ 4742.219010] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[ 4742.219040] [DEBUG] ModulePath: /usr/lib/nvidia-331-updates/xorg,/usr/lib/xorg/modules
[ 4742.219074] [DEBUG] GID name: bumblebee
[ 4742.219102] [DEBUG] Power method: auto
[ 4742.219136] [DEBUG] Stop X on exit: 1
[ 4742.219172] [DEBUG] Driver: nvidia
[ 4742.219202] [DEBUG] Driver module: nvidia-331-updates
[ 4742.219238] [DEBUG] Card shutdown state: 1
[ 4742.219431] [DEBUG]Process /sbin/modprobe started, PID 3024.
[ 4742.219517] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[ 4742.221990] [DEBUG]SIGCHILD received, but wait failed with No child processes
[ 4742.222054] [DEBUG]Configuration test passed.
[ 4742.222937] [INFO]/usr/sbin/bumblebeed 3.2.1 started
[ 4742.223214] [INFO]Switching dedicated card OFF [bbswitch]
[ 4742.404703] [INFO]Initialization completed - now handling client requests
И это - работа!
Я не могу понять, почему первая команда не осуществима. В bumblebee.conf "драйвере" значением является "Nvidia". Почему в первой команде это, пробуя модуль драйвера загрузки "Nvidia" вместо этого "nvidia-331-updates"? Обе команды должны быть осуществимы или нет. Вместе. Как решить эту проблему?
изменение LibraryPath=/usr/lib/nvidia-331-updates:/usr/lib32/nvidia-331-updates
кому: LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current
изменение [driver-nvidia]
кому:
Driver=nvidia [driver-nvidia]
изменение [driver-nouveau]
кому:
Driver=nouveau [driver-nouveau]
изменение KernelDriver=nvidia-331-updates
кому: KernelDriver=nvidia_331_updates
или KernelDriver=nvidia
ТОТ ЛОГИЧЕСКИЙ ШМЕЛЬ-.-
ОБНОВИТЕ Попытку это: изменение LibraryPath=/usr/lib/nvidia-331-updates,/usr/lib32/nvidia-331-updates
кому: LibraryPath=/usr/lib/nvidia-331-updates,/usr/lib32/nvidia-331-updates
Моя конфигурация шмеля:
# Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver= # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia_331_updates PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-331-updates,/usr/lib32/nvidia-331-updates # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-331-updates/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Мой xorg.conf.nvidia:
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "AutoAddDevices" "false" Option "AutoAddGPU" "false" Option "Xinerama" "0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "Device" # If the X server does not automatically detect your VGA device, # you can manually set it here. # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data # as you see in the commented example. # This Setting may be needed in some platforms with more than one # nvidia card, which may confuse the proprietary driver (e.g., # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04. # Setting ProbeAllGpus to false prevents the new proprietary driver # instance spawned to try to control the integrated graphics card, # which is already being managed outside bumblebee. # This option doesn't hurt and it is required on platforms running # more than one nvidia graphics card with the proprietary driver. # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT). # If this option is not set, the new Xorg may blacken the screen and # render it unusable (unless you have some way to run killall Xorg). Identifier "DiscreteNvidia" Driver "nvidia" VendorName "NVIDIA Corporation" Option "ProbeAllGpus" "false" Option "NoLogo" "true" Option "UseEDID" "false" Option "UseDisplayDevice" "none" BusID "PCI:01:00:0" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Default Screen" Device "DiscreteNvidia" EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 Option "UseDisplayDevice" "none" SubSection "Display" Virtual 1600 900 Depth 24 EndSubSection EndSection
После новой установки Шмеля и Nvidia и DKMS и т.д.
Создайте резервное копирование (если существуют файл), sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
Ввести optirun -b none nvidia-settings -c :8
и сохраните, конфигурируют Xorg к /etc/bumblebee/xorg.conf.nvidia
nvidia-settings
не сохранение к /etc/bumblebee/xorg.conf.nvidia
. Конфигурация от nvidia-settings
был сохранен к /etc/X11/xorg.conf
Необходимо переместить этот файл в конфигурацию xorg-nvidia шмеля. Ввести sudo rm /etc/bumblebee/xorg.conf.nvidia && sudo mv /etc/X11/xorg.conf /etc/bumblebee/xorg.conf.nvidia
Перезагрузка ;)
Это работает на меня