HP 625 AMD Turion нагрев, приостановка, скорость вращения вентилятора

Я использую Ubuntu 16.04 (64 бит) на ноутбуке HP 625 (процессор AMD Turion P540, 4 ГБ ОЗУ). Все работает без сбоев, кроме того, что я считаю, что система не справляется со скоростью вращения вентиляторов, и в результате мой процессор нагревается. Если я работаю от сети переменного тока, кажется, что все работает нормально, но если я отсоединяю свой ноутбук, вентилятор останавливается и перезапускается только тогда, когда температура достигает очень диких градусов (70 C), а затем сильно раскручивается. У меня та же проблема с функциями приостановки, если я просыпаюсь, вентилятор снова не вращается.

Любое решение? Я не испытываю ни одной из этих проблем в Windows 7 (у меня двойная загрузка системы). Фактически с Windows 7 моя система работает на 10 градусов круче (у меня установлены lm-сенсоры). Что странно, что мой ноутбук изначально поставлялся с SLED 11, поэтому должен быть полностью совместим с Linux.

Спасибо за помощь!

Hunor

lucifer@lucifer-HP-625:~$ sudo sensors-detect
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Hewlett-Packard HP 625 (laptop)
# Board: Hewlett-Packard 1475
# Kernel: 4.4.0-21-generic x86_64
# Processor: AMD Turion(tm) II P540 Dual-Core Processor (16/6/3)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           Success!
    (driver `k10temp')
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     Yes
Found `SMSC FDC37B72x Super IO'                             
    (no hardware monitoring capabilities)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus

Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively): y
Client found at address 0x28
Probing for `National Semiconductor LM78'...                No
Probing for `National Semiconductor LM79'...                No
Probing for `National Semiconductor LM80'...                No
Probing for `National Semiconductor LM96080'...             No
Probing for `Winbond W83781D'...                            No
Probing for `Winbond W83782D'...                            No
Probing for `Nuvoton NCT7802Y'...                           No
Probing for `Winbond W83627HF'...                           No
Probing for `Winbond W83627EHF'...                          No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'...        No
Probing for `Asus AS99127F (rev.1)'...                      No
Probing for `Asus AS99127F (rev.2)'...                      No
Probing for `Asus ASB100 Bach'...                           No
Probing for `Analog Devices ADM1029'...                     No
Probing for `ITE IT8712F'...                                No

Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively): y


Now follows a summary of the probes I have just done.
Just press ENTER to continue: 

Driver `k10temp' (autoloaded):
  * Chip `AMD Family 10h thermal sensors' (confidence: 9)

No modules to load, skipping modules configuration.

Unloading cpuid... OK

lucifer@lucifer-HP-625:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +53.0°C  (crit = +108.0°C)
temp2:        +20.9°C  (crit = +108.0°C)

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +53.0°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +95.0°C)