Я ищу конкретные инструкции для этого , отмечая, что Как мне установить файл .tar.gz (или .tar.bz2)? может дать Общее Руководство.
Другими словами, что делать с VMware-converter-6.2.0-7348398.odp.tgz
(*)?
Ответ на этот вопрос может быть очевидным, но, поскольку быстрый поиск не дал никаких полезных результатов и руководство на vmware.com предназначено только для установки на базе Windows, я подумал, что здесь стоит спросить.
(*) скачано (бесплатно, после регистрации) с здесь, на my.vmware.com . См. Также этот вопрос без ответа на сайте community.vmware.com .
/tmp/VMware-converter-6.2.0-7348398.odp$ ls
bash-4.1 iconv-1.9.2 reiserfsprogs-3.6.19
build_ttylinux.sh iptables-1.4.9.1 SYSTEMS.txt
busybox-1.11.1 libiconv-1.9.2 tar-1.28
busybox-1.18.4 libmspack-0.0.20040308alpha test
e2fsprogs-1.40.11 libparted-3.1 ttylinux-12.6
e2fsprogs-1.41.12 log4cpp-1.0 udev-163
efibootmgr-0.5.4 lvm2-2.02.95 util-linux-ng-2.18
extract_helper.sh module-init-tools-3.12 vmware-sysinfo-1.0
glib-2.24.2-1 net-tools-1.60 xfsprogs-3.2.2
glibc-2.12.1 package_helper.sh
grub-0.97-75 procps-3.2.7-1
содержимое SYSTEMS.txt
:
<час>Следующие системы используются при создании этого раскрытия VMware. Домен "example.org" используется в этом документе для определения систем. Настройте этот домен и имена хостов в соответствии с вашей средой.
"rhel-7.3-x32" Это система Red Hat EL 7.3. Образы ISO для этой установки доступны по адресу http://redhat.lsu.edu/dist/7.3/iso/ . Эта система должна быть сконфигурирована с минимум 32 ГБ дискового пространства для размещения сборки. Файл кикстарта для настройки этой системы находится в каталоге config / rhel-7.3-x32.cfg вместе с файлом образа дискеты (rhel-7.3-x32.flp), содержащим этот файл ks.cfg. Система 7.3 не поддерживает файлы кикстарта через http, вместо этого следует использовать образ дискеты. Система должна быть настроена с помощью команды приглашения к загрузке
linux ks=floppy after attaching the floppy image to the diskette device. The kickstart file includes a "%post" section which * Configures the system to automount the shared file server used to host the VMware Toolchain disclosure. Please adjust the hostname for this server in the kickstart file. * Creates the user "vmware" with a home directory of "/usr/vmware". The directories under this home directory are used when building disclosed packages. The passwords defined by the kickstart file for the "vmware" user is "welcome". No internet based updated are applied to this system. The "as installed" system is used when building package. For your reference, the ISO images used by VMware for this system were cb91810ce8173039fed24420407e4c59 valhalla-i386-disc1.iso ec1b813d32ffdc8edc2be261735d17de valhalla-i386-disc2.iso 5dc81ce523cfddf99b4d4d63e91bcaa7 valhalla-i386-disc3.iso NOTE: A similiarly configured system is used when building the VMware Toolchain disclosure. However, that system is not configured to automount the shared file server: the %post sections differ.
"centos-4.8-x32" Это 32-битная система CentOS 4.8. Эта система должна быть сконфигурирована с минимум 16 ГБ дискового пространства для размещения сборок. Файл кикстарта для настройки этой системы доступен в файле "config / centos-4.8-x32-ks.cfg". Файл должен храниться на веб-сервере, например, «ns.example.org», а система должна быть настроена с помощью команды приглашения к загрузке
linux ks=http://ns.example.org/centos-4.8-x32-ks.cfg The kickstart file includes a "%post" section which * Configures the system to automount the shared file server used to host the VMware Toolchain disclosure. Please adjust the hostname for this server in the kickstart file. * Creates the user "vmware" with a home directory of "/usr/vmware". The directories under this home directory are used when building disclosed packages. The passwords defined by the kickstart file for both "root" and "vmware" are both "welcome". No internet based updated are applied to this system. The "as installed" system is used when building package. For your reference, the ISO image used by VMware for this system was (MD5 checksum): f663dfc0a0ee610d23c223468004c745 CentOS-4.8-i386-binDVD.iso
«centos-5.3-x32». Это CentOS 5.3 32-битная система. Эта система должна быть сконфигурирована с минимум 16 ГБ дискового пространства для размещения сборок. Файл кикстарта для настройки этой системы доступен в файле "config / centos-5.3-x32-ks.cfg". Файл должен храниться на веб-сервере, например, «ns.example.org», а система должна быть настроена с помощью команды приглашения к загрузке
linux ks=http://ns.example.org/centos-5.3-x32-ks.cfg The kickstart file includes a "%post" section which * Configures the system to automount the shared file server used to host the VMware Toolchain disclosure. Please adjust the hostname for this server in the kickstart file. * Creates the user "vmware" with a home directory of "/usr/vmware". The directories under this home directory are used when building disclosed packages. * Disables services not required when building disclosures. The passwords defined by the kickstart file for both "root" and "vmware" are both "welcome". No internet based updated are applied to this system. The "as installed" system is used when building packages. For your reference, the ISO image used by VMware for this system was (MD5 checksum): 997638cd72a559e38f9fd1955a368231 CentOS-5.3-i386-bin-DVD.iso
«centos-5.3-x64». Это CentOS 5.3 64-битная система. Эта система должна быть сконфигурирована с минимум 16 ГБ дискового пространства для размещения сборок. Файл кикстарта для настройки этой системы доступен в файле "config / centos-5.3-x64-ks.cfg". Файл должен храниться на веб-сервере, например, «ns.example.org», а система должна быть настроена с помощью команды приглашения к загрузке
linux ks=http://ns.example.org/centos-5.3-x64-ks.cfg The kickstart file includes a "%post" section which * Configures the system to automount the shared file server used to host the VMware Toolchain disclosure. Please adjust the hostname for this server in the kickstart file. * Creates the user "vmware" with a home directory of "/usr/vmware". The directories under this home directory are used when building disclosed packages. * Disables services not required when building disclosures. The passwords defined by the kickstart file for both "root" and "vmware" are both "welcome". No internet based updated are applied to this system. The "as installed" system is used when building packages. For your reference, the ISO image used by VMware for this system was (MD5 checksum): 6d4fd59688ed8644514010316d6a5698 CentOS-5.3-x86_64-bin-DVD.iso
«freebsd-6.3-x32». Это FreeBSD. 6.3 32-битная система. Эта система должна быть сконфигурирована с минимум 16 ГБ дискового пространства для размещения сборок. Файл кикстарта недоступен для этой системы. Пожалуйста, установите, используя
Standard Begin a standard installation (recommended) installation option. When the "Choose Distributions" menu is displayed please select the distributions X-Developer Kern-Developer X-User The install should be performed against CD/DVD media. For your reference, the ISO images used by VMware for this system were (MD5 checksum): cdb0dfa4b2db3e4c9cc19138f4fb2ada 6.3-RELEASE-i386-disc1.iso e73a3d9cf5f3bfbf07384ef0a93ae5d5 6.3-RELEASE-i386-disc2.iso 123840107a5578ce22875c440d41f453 6.3-RELEASE-i386-disc3.iso
"freebsd-6.3-x64". Это 64-битная система FreeBSD 6.3. Эта система должна быть сконфигурирована с минимум 16 ГБ дискового пространства для размещения сборок. Файл кикстарта недоступен для этой системы. Пожалуйста, установите, используя
Standard Begin a standard installation (recommended) installation option. When the "Choose Distributions" menu is displayed please select the distributions X-Developer Kern-Developer X-User The install should be performed against CD/DVD media. For your reference, the ISO images used by VMware for this system were (MD5 checksum): a8d41ea26769919db6c0c672fa8f8c4f 6.3-RELEASE-amd64-disc1.iso a243076fb99b011d9b0771a6f7f9a977 6.3-RELEASE-amd64-disc2.iso 92831414b34b4b06cfb7140ddfe69cfe 6.3-RELEASE-amd64-disc3.iso
«windows-xp-x64» Это 64-битная версия Windows XP Professional. Пожалуйста, выполните следующие шаги:
1. Install Windows XP Professional 64-bit. VMware uses Microsoft 32 bit compilers on a 64 bit system to build the 32 bit Toolchain. 2. Install Visual studio 2008 Professional Edition. * Install everything under Visual C++ Language Tools including X64 Compilers & Tools * Apply the SP1 patch from http://www.microsoft.com/downloads/details.aspx?FamilyId=FBEE1648-7106-44A7-9649-6D9F6D58056E&displaylang=en to your visual studio installation. 3. Copy the following to c:\toolchain\win32\bin Copy fromdos.exe and todos.exe - http://tofrodos.sourceforge.net/download/tfd1712a.zip Copy usr/local/wbin/* from UnxUtils - http://sourceforge.net/projects/unxutils/files/unxutils/current/UnxUtils.zip/download Install Cygwin and then copy "sh.exe", and "cp.exe", and "tar.exe" (and various cygwin dlls required to run them) from the Cygwin installation. At the time of publishing, the commands to do this are: $ cd \Toolchain\win32\bin $ copy \cygwin\bin\sh.exe sh.exe $ copy \cygwin\bin\cp.exe cp.exe $ copy \cygwin\bin\tar.exe tar.exe $ copy \cygwin\bin\cygwin1.dll cygwin1.dll $ copy \cygwin\bin\cygintl-8.dll cygintl-8.dll $ copy \cygwin\bin\cygiconv-2.dll cygiconv-2.dll $ copy \cygwin\bin\cygreadline7.dll cygreadline7.dll $ copy \cygwin\bin\cygncursesw-10.dll cygncursesw-10.dll $ copy \cygwin\bin\cyggcc_s-1.dll cyggcc_s-1.dll $ copy \cygwin\bin\cygattr-1.dll cygattr-1.dll 4. Copy over the Windows toolchain binaries for win32 and win64 from the shared file system to the below folders: C:\toolchain\win32 C:\toolchain\win64 5. Please use Visual Studio 2008 x64 Cross Tools Command Prompt to build 64-bit binaries and use Visual Studio 2008 Command Prompt to build 32-bit binaries. 6. Add C:\toolchain\win32\bin to PATH $ set PATH=C:\toolchain\win32\bin;%PATH% NOTE: A similiarly configured system is used when building the VMware Toolchain disclosure.
$ sudo find . -print | grep -i 'install'
[sudo] password for _______________________:
./xfsprogs-3.2.2/INSTALL.txt
./e2fsprogs-1.40.11/INSTALL.txt
./busybox-1.18.4/INSTALL.txt
./grub-0.97-75/INSTALL.txt
./iconv-1.9.2/INSTALL.txt
./busybox-1.11.1/INSTALL.txt
./libiconv-1.9.2/INSTALL.txt
./e2fsprogs-1.41.12/INSTALL.txt
./log4cpp-1.0/INSTALL.txt
./glib-2.24.2-1/INSTALL.txt
./tar-1.28/INSTALL.txt
./udev-163/INSTALL.txt
./iptables-1.4.9.1/INSTALL.txt
./util-linux-ng-2.18/INSTALL.txt
./reiserfsprogs-3.6.19/INSTALL.txt
./ttylinux-12.6/INSTALL.txt
./procps-3.2.7-1/INSTALL.txt
./glibc-2.12.1/INSTALL.txt
./bash-4.1/INSTALL.txt
./libmspack-0.0.20040308alpha/INSTALL.txt
./net-tools-1.60/INSTALL.txt
./net-tools-1.60/net-tools-1.60-installlib.patch
./lvm2-2.02.95/INSTALL.txt
./efibootmgr-0.5.4/INSTALL.txt
./vmware-sysinfo-1.0/INSTALL.txt
./module-init-tools-3.12/INSTALL.txt
./test/sysinfo-install.sh
./test/helper-install.sh
./libparted-3.1/INSTALL.txt