Как настроить экран плазмы 50 дюймов Panasonic с xorg.conf

У меня есть Ubuntu (16.04 LTS) установленный на Гигабайте Brix (GB-BACE-3150). Это подключено к 50-дюймовому Panasonic Plasma TV (TH-50PX600A) с помощью HDMI. Изображение на экране больше затем экран на всех сторонах, отключая края. Информация о системе для экрана сообщает об этом как о 65-дюймовом ТВ Panasonic вместо 50 дюймов. Я отмечаю, что EDID для ТВ не указывает размер дисплея. Это поэтому, кажется, принимает значение по умолчанию к 65 дюймам.

Я думал, что, если бы я указал размер требуемого дисплея через xorg.conf файл, дисплей был бы уменьшен для установки экрану, но дело обстоит не так, изображение на дисплее еще больше, чем экран.

ТВ не имеет корректировки соотношения сторон, которая позволяет изображению быть уменьшенным для установки.

Я рассмотрел файл журнала Xorg, и кажется, что это загружает мой xorg.conf правильно. Мой xorg.conf и файл журнала следующие.

Любой совет относительно того, как заставить изображение соответствовать размеру экрана телевизора, значительно ценился бы.

Section "Device"
        Identifier      "Intel Graphics"
    Driver      "intel"
EndSection

Section "Monitor"
        Identifier    "Panasonic-50"
        HorizSync 15.0 - 46.0 
        VertRefresh 48.0 - 61.0 
        Modeline "1280x720" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
        Modeline "1366x768" 85.500 1360 1440 1552 1792 768 771 777 795 +hsync +vsync
        Modeline "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1125 +hsync +vsync interlace
    DisplaySize 1106 622
        Option       "UseEDID" "false"
EndSection

Section "Screen"
        Identifier      "Screen 0"
        Monitor         "Panasonic-50"
        Device          "Intel Graphics"

    SubSection "Display"
        Modes "1280x720" "1366x768" "1920x1080"
    EndSubSection
EndSection

X.Org X Server 1.19.3
Release Date: 2017-03-15
[     6.560] X Protocol Version 11, Revision 0
[     6.560] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     6.560] Current Operating System: Linux BRICK 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64
[     6.560] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-36-generic.efi.signed root=UUID=69b8f9c0-513a-443b-bb08-6684e58a0022 ro quiet splash vt.handoff=7
[     6.560] Build Date: 13 October 2017  02:11:50PM
[     6.560] xorg-server 2:1.19.3-1ubuntu1~16.04.4 (For technical support please see http://www.ubuntu.com/support) 
[     6.560] Current version of pixman: 0.33.6
[     6.560]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[     6.560] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.561] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  3 20:50:09 2018
[     6.561] (==) Using config file: "/etc/X11/xorg.conf"
[     6.561] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.562] (==) No Layout section.  Using the first Screen section.
[     6.562] (**) |-->Screen "Screen 0" (0)
[     6.562] (**) |   |-->Monitor "Panasonic-50"
[     6.563] (**) |   |-->Device "Intel Graphics"
[     6.563] (==) Automatically adding devices
[     6.563] (==) Automatically enabling devices
[     6.563] (==) Automatically adding GPU devices
[     6.563] (==) Automatically binding GPU devices
[     6.563] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.563] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.563]    Entry deleted from font path.
[     6.563] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.563]    Entry deleted from font path.
[     6.563] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.563]    Entry deleted from font path.
[     6.563] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.563]    Entry deleted from font path.
[     6.563] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.563]    Entry deleted from font path.
[     6.563] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[     6.563] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.563] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.563] (II) Loader magic: 0x561ac385be00
[     6.563] (II) Module ABI versions:
[     6.563]    X.Org ANSI C Emulation: 0.4
[     6.563]    X.Org Video Driver: 23.0
[     6.563]    X.Org XInput driver : 24.1
[     6.563]    X.Org Server Extension : 10.0
[     6.565] (++) using VT number 7

[     6.566] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.567] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.584] (--) PCI:*(0:0:2:0) 8086:22b1:1458:1000 rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     6.584] (II) LoadModule: "glx"
[     6.586] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.599] (II) Module glx: vendor="X.Org Foundation"
[     6.600]    compiled for 1.19.3, module version = 1.0.0
[     6.600]    ABI class: X.Org Server Extension, version 10.0
[     6.600] (II) LoadModule: "intel"
[     6.600] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.605] (II) Module intel: vendor="X.Org Foundation"
[     6.605]    compiled for 1.19.3, module version = 2.99.917
[     6.605]    Module class: X.Org Video Driver
[     6.605]    ABI class: X.Org Video Driver, version 23.0
[     6.605] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.606] (II) intel: Driver for Intel(R) HD Graphics
[     6.606] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     6.606] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     6.607] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170619
[     6.607] (II) intel(0): SNA compiled: xserver-xorg-video-intel-hwe-16.04 2:2.99.917+git20170309-0ubuntu1~16.04.1 (Timo Aaltonen <tjaalton@debian.org>)
[     6.607] (II) intel(0): SNA compiled for use with valgrind
[     6.609] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     6.610] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads
[     6.610] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.610] (==) intel(0): RGB weight 888
[     6.610] (==) intel(0): Default visual is TrueColor
[     6.611] (II) intel(0): Output DP1 using monitor section Panasonic-50
[     6.611] (II) intel(0): Enabled output DP1
[     6.611] (II) intel(0): Output HDMI1 has no monitor section
[     6.612] (II) intel(0): Enabled output HDMI1
[     6.612] (II) intel(0): Output DP2 has no monitor section
[     6.612] (II) intel(0): Enabled output DP2
[     6.612] (II) intel(0): Output HDMI2 has no monitor section
[     6.612] (II) intel(0): Enabled output HDMI2
[     6.612] (II) intel(0): Output DP3 has no monitor section
[     6.613] (II) intel(0): Enabled output DP3
[     6.613] (II) intel(0): Output HDMI3 has no monitor section
[     6.613] (II) intel(0): Enabled output HDMI3
[     6.613] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.613] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.613] (II) intel(0): Enabled output VIRTUAL1
[     6.613] (--) intel(0): Output HDMI3 using initial mode 1280x720 on pipe 2
[     6.613] (==) intel(0): TearFree disabled
[     6.614] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.614] (**) intel(0): Display dimensions: (1106, 622) mm
[     6.614] (**) intel(0): DPI set to (29, 29)
0
задан 3 March 2018 в 04:20

1 ответ

То, что Вы испытываете, является ТВ "функция", обычно называемая сверхсканированием. Вы не можете зафиксировать его путем изменения X настроек, потому что нет ничего неправильно с ними во-первых. ТВ выбрасывает внешний край изображения нарочно, и это будет продолжать делать это, каков входной сигнал.

Хорошие новости - то, что это может быть выключено, поэтому просто иметь трал через телевизионное меню, пока Вы не находите его. (У меня, оказывается, есть плазма Panasonic также, в моем она находится под Изображением> Экранные Настройки> 16:9 Сверхсканирование, но ymmv),

1
ответ дан 30 October 2019 в 08:22

Другие вопросы по тегам:

Похожие вопросы: