Ubuntu не может подключить внешний RAID с «Ошибка чтения с диска». Как мне решить эту проблему?

Я пытаюсь подключить Mediasonic HFR2-SU3S2 к моей машине с Ubuntu. Он содержит четыре накопителя WD Red емкостью 3 ТБ в RAID5. Ниже приведен вывод команды dmesg -w, когда я подключаю диск к USB-порту.

[ 2092.514195] sd 4:0:0:0: [sdd] Spinning up disk...
[ 2093.535785] ..ready
[ 2102.544008] sd 4:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 2102.544278] sd 4:0:0:0: [sdd] 17581277184 512-byte logical blocks: (9.00 TB/8.19 TiB)
[ 2102.544283] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 2104.544317] sd 4:0:0:0: [sdd] Write Protect is off
[ 2104.544323] sd 4:0:0:0: [sdd] Mode Sense: 67 00 10 08
[ 2106.544409] sd 4:0:0:0: [sdd] No Caching mode page found
[ 2106.544418] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 2141.611994] usb 1-5: reset high-speed USB device number 16 using xhci_hcd
[ 2296.095334] sd 4:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2296.095341] sd 4:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current] 
[ 2296.095345] sd 4:0:0:0: [sdd] tag#0 Add. Sense: Logical unit is in process of becoming ready
[ 2296.095351] sd 4:0:0:0: [sdd] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 2296.095354] print_req_error: 2 callbacks suppressed
[ 2296.095358] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2296.095366] buffer_io_error: 2 callbacks suppressed
[ 2296.095368] Buffer I/O error on dev sdd, logical block 0, async page read
[ 2297.119949] INFO: task fdisk:7277 blocked for more than 120 seconds.
[ 2297.119957]       Tainted: P           OE     5.4.0-40-generic #44-Ubuntu
[ 2297.119960] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2297.119964] fdisk           D    0  7277   7276 0x00000004
[ 2297.119969] Call Trace:
[ 2297.119981]  __schedule+0x2e3/0x740
[ 2297.119988]  ? sr_do_ioctl+0x81/0x1b0
[ 2297.119992]  schedule+0x42/0xb0
[ 2297.119996]  schedule_preempt_disabled+0xe/0x10
[ 2297.120000]  __mutex_lock.isra.0+0x182/0x4f0
[ 2297.120007]  ? exact_lock+0x11/0x20
[ 2297.120012]  __mutex_lock_slowpath+0x13/0x20
[ 2297.120015]  mutex_lock+0x2e/0x40
[ 2297.120021]  __blkdev_get+0x78/0x550
[ 2297.120026]  blkdev_get+0x3d/0x140
[ 2297.120030]  ? blkdev_get_by_dev+0x50/0x50
[ 2297.120034]  blkdev_open+0x8f/0xa0
[ 2297.120041]  do_dentry_open+0x143/0x3a0
[ 2297.120044]  vfs_open+0x2d/0x30
[ 2297.120050]  do_last+0x194/0x900
[ 2297.120056]  path_openat+0x8d/0x290
[ 2297.120062]  do_filp_open+0x91/0x100
[ 2297.120068]  ? __alloc_fd+0x46/0x150
[ 2297.120072]  do_sys_open+0x17e/0x290
[ 2297.120076]  __x64_sys_openat+0x20/0x30
[ 2297.120082]  do_syscall_64+0x57/0x190
[ 2297.120088]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2297.120092] RIP: 0033:0x7f0e54476d1b
[ 2297.120101] Code: Bad RIP value.
[ 2297.120104] RSP: 002b:00007ffd0d7306c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[ 2297.120109] RAX: ffffffffffffffda RBX: 00007ffd0d730740 RCX: 00007f0e54476d1b
[ 2297.120111] RDX: 0000000000000000 RSI: 000056064438d650 RDI: 00000000ffffff9c
[ 2297.120113] RBP: 000056064438d650 R08: 00000000000001ff R09: 00007ffd0d7307d5
[ 2297.120115] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 2297.120117] R13: 00007ffd0d731820 R14: 00007ffd0d731820 R15: 0000560642d8df51
[ 2538.923913] usb 1-5: reset high-speed USB device number 16 using xhci_hcd
[ 2539.080496] sd 4:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK
[ 2539.080498] sd 4:0:0:0: [sdd] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[ 2539.080500] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 2539.080503] Buffer I/O error on dev sdd, logical block 0, async page read
[ 2539.080509] ldm_validate_partition_table(): Disk read failed.

Честно говоря, я не уверен, что я читаю здесь. Это устройство отлично работало на Windows несколько месяцев назад (у меня больше нет установки Windows). Какими должны быть мои следующие шаги по устранению неполадок? Буду признателен за любую помощь!