Ubuntu 16.04.1 с ядром 4.12.10-041210-универсальный Bluetooth intel 8260, не работающий

Я нахожусь на Dell Latitude E7270 с последним BIOS (сентябрь 2017), рабочая человечность 16.04.1. Я сначала обновил запас 16.04.1 ядра до магистрали, 4.11.7-041107-универсальной без проблемы, затем я обновил до 4.12.10-041210-универсального ядра и Wi-Fi, и Bluetooth оба прекратил работать. Таким образом, я установил на последнем использовании встроенных микропрограммных обеспечений (не знайте точно, что было там перед обновлением).

sudo dpkg -i linux-firmware_1.167_all.deb 
(Lecture de la base de données... 1877982 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de linux-firmware_1.167_all.deb ...
Dépaquetage de linux-firmware (1.167) sur (1.167) ...
Paramétrage de linux-firmware (1.167) ...
update-initramfs: Generating /boot/initrd.img-4.12.10-041210-generic
update-initramfs: Generating /boot/initrd.img-4.11.7-041107-generic
update-initramfs: Generating /boot/initrd.img-4.4.0-93-generic

из http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/.

После того, как Wi-Fi перезагрузки начал работать снова, но Bluetooth все еще снижается:

uname -a; lspci -nnk | grep -iA2 net; lsusb; dmesg | grep -i bluetooth; dmesg | grep -i firmware; lsmod | grep bluetooth
Linux mypc 4.12.10-041210-generic #201708300614 SMP Wed Aug 30 10:16:40 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection I219-LM [8086:156f] (rev 21)
    Subsystem: Dell Ethernet Connection I219-LM [1028:06db]
    Kernel driver in use: e1000e
    Kernel modules: e1000e
01:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
    Subsystem: Intel Corporation Wireless 8260 [8086:0050]
    Kernel driver in use: iwlwifi
Bus 002 Device 002: ID 0bc2:61b6 Seagate RSS LLC 
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2b Intel Corp. 
Bus 001 Device 003: ID 0a5c:5805 Broadcom Corp. 
Bus 001 Device 002: ID 0bda:5686 Realtek Semiconductor Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    3.753864] Bluetooth: Core ver 2.22
[    3.753874] Bluetooth: HCI device and connection manager initialized
[    3.753876] Bluetooth: HCI socket layer initialized
[    3.753878] Bluetooth: L2CAP socket layer initialized
[    3.753881] Bluetooth: SCO socket layer initialized
[    3.761490] Bluetooth: HCI UART driver ver 2.3
[    3.761491] Bluetooth: HCI UART protocol H4 registered
[    3.761491] Bluetooth: HCI UART protocol BCSP registered
[    3.761500] Bluetooth: HCI UART protocol LL registered
[    3.761501] Bluetooth: HCI UART protocol ATH3K registered
[    3.761501] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.761522] Bluetooth: HCI UART protocol Intel registered
[    3.761533] Bluetooth: HCI UART protocol Broadcom registered
[    3.761534] Bluetooth: HCI UART protocol QCA registered
[    3.761534] Bluetooth: HCI UART protocol AG6XX registered
[    3.761535] Bluetooth: HCI UART protocol Marvell registered
[    4.684487] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.684489] Bluetooth: BNEP filters: protocol multicast
[    4.684491] Bluetooth: BNEP socket layer initialized
[    5.008318] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[    5.015600] Bluetooth: hci0: Device revision is 5
[    5.015602] Bluetooth: hci0: Secure boot is enabled
[    5.015602] Bluetooth: hci0: OTP lock is enabled
[    5.015603] Bluetooth: hci0: API lock is enabled
[    5.015604] Bluetooth: hci0: Debug lock is disabled
[    5.015605] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.017591] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    5.168505] Bluetooth: hci0: Failed to send firmware data (-38)
[    7.172835] Bluetooth: hci0 command 0xfc05 tx timeout
[    7.172836] Bluetooth: hci0: Reading Intel version information failed (-110)
[    0.342425] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    1.657608] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    3.854841] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2
[    3.854929] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2
[    3.854941] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
[    3.861080] iwlwifi 0000:01:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm
[    5.015605] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    5.017591] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[    5.168505] Bluetooth: hci0: Failed to send firmware data (-38)
bluetooth             540672  14 btrtl,hci_uart,btintel,btqca,bnep,btbcm,btusb
ecdh_generic           24576  1 bluetooth

Таким образом, это кажется, intel/ibt-11-5.sfi преступник, но я не могу найти более новое встроенное микропрограммное обеспечение Bluetooth Intel.

Какая-либо идея?

Править:

После чистить ботинка, выполняя это в терминале чинит Bluetooth:

sudo modprobe -r btusb
sudo modprobe btusb

это добавляется к dmesg:

[  527.599582] usbcore: deregistering interface driver btusb
[  542.659674] usbcore: registered new interface driver btusb
[  542.660139] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[  542.665299] Bluetooth: hci0: Device revision is 5
[  542.665300] Bluetooth: hci0: Secure boot is enabled
[  542.665301] Bluetooth: hci0: OTP lock is enabled
[  542.665301] Bluetooth: hci0: API lock is enabled
[  542.665302] Bluetooth: hci0: Debug lock is disabled
[  542.665303] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  542.665455] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[  544.470541] Bluetooth: hci0: Waiting for firmware download to complete
[  544.471154] Bluetooth: hci0: Firmware loaded in 1769079 usecs
[  544.471255] Bluetooth: hci0: Waiting for device to boot
[  544.482452] Bluetooth: hci0: Device booted in 10961 usecs
[  544.482545] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
[  544.486308] Bluetooth: hci0: Applying Intel DDC parameters completed
[  544.548301] Bluetooth: RFCOMM TTY layer initialized
[  544.548312] Bluetooth: RFCOMM socket layer initialized
[  544.548322] Bluetooth: RFCOMM ver 1.11

Однако мне нужно к modprobe вручную после каждой перезагрузки. Какая-либо идея, как зафиксировать это для получения его работающий правильно после начальной загрузки?