end_request Ошибка ввода-вывода, сектор dev sdc xxxx - сбой SSD?

Я использую Ubuntu 12.04, и кажется, что мой SSD выходит из строя. Через произвольное количество времени диск просто печатает end_request i/o error, dev sdc sector xxx, когда я ввожу команду, подобную ls или что-нибудь еще. Это может произойти через 24 часа или через несколько минут.

Все тесты SMART (короткие / расширенные) проходят, и перераспределенных секторов нет, хотя я не уверен, что SSD справятся с этим, как старые магнитные типы.

Счетчик ошибок программы, кажется, явная проблема в журнале SMART. 4745980543444 не удается? Это почти 5 триллионов?

Могу ли я чем-то отличаться от обычного жесткого диска?

=== START OF INFORMATION SECTION ===
Device Model:     M4-CT064M4SSD2
Serial Number:    0000000011290314D92E
LU WWN Device Id: 5 00a075 10314d92e
Firmware Version: 0009
User Capacity:    64,023,257,088 bytes [64.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sun Oct 13 17:55:36 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (  295) seconds.
Offline data collection
capabilities:            (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    (   4) minutes.
Conveyance self-test routine
recommended polling time:    (   3) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       5385
 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       563
170 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       0
171 Unknown_Attribute       0x0032   100   100   001    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   001    Old_age   Always       -       0
173 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       22
174 Unknown_Attribute       0x0032   100   100   001    Old_age   Always       -       0
181 Program_Fail_Cnt_Total  0x0022   100   100   001    Old_age   Always       -       4745980543444
183 Runtime_Bad_Block       0x0032   100   100   001    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
189 High_Fly_Writes         0x000e   100   100   001    Old_age   Always       -       60
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0
202 Data_Address_Mark_Errs  0x0018   100   100   001    Old_age   Offline      -       0
206 Flying_Height           0x000e   100   100   001    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      5385         -
# 2  Short offline       Completed without error       00%      5385         -
# 3  Extended offline    Completed without error       00%      5381         -
# 4  Vendor (0xff)       Completed without error       00%      3907         -
# 5  Vendor (0xff)       Completed without error       00%      3884         -
# 6  Vendor (0xff)       Completed without error       00%      3880         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.