Для этой команды:
hwinfo --netcard --wlan --bluetooth | grep -Ei "model\:|driver\:|status\:|cmd\:|file\:|detected\:" | grep -v "Config Status"
Я получаю этот вывод:
Model: "Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter"
Driver: "ath10k_pci"
Device File: wlp2s0
Link detected: no
Driver Status: ath10k_pci is active
Driver Activation Cmd: "modprobe ath10k_pci"
Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
Driver: "r8169"
Device File: enp3s0f1
Link detected: no
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Model: "Lite-On Bluetooth Device"
Driver: "btusb"
Driver Status: btusb is active
Driver Activation Cmd: "modprobe btusb"'
Подробная информация о моем андроид смартфоне:
Настройки Wifi Hotspot:
Эта команда:
[ 112]дает этот вывод:
iw reg get; dmesg | grep
global country IN: DFS-UNSET
(2402 - 2482 @ 40), (N/A, 20), (N/A)
(5150 - 5350 @ 160), (N/A, 23), (N/A)
(5725 - 5875 @ 80), (N/A, 23), (N/A)
[ 21.238421] ath10k_pci 0000:02:00.0: pci irq
[ 21.627619] ath10k_pci 0000:02:00.0: qca9377
[ 21.627624] ath10k_pci 0000:02:00.0: kconfig
[ 21.628448] ath10k_pci 0000:02:00.0: firmwar
[ 21.739131] ath10k_pci 0000:02:00.0: board_f
[ 22.342692] ath10k_pci 0000:02:00.0: Unknown
[ 22.345496] ath10k_pci 0000:02:00.0: Unknown
[ 22.346167] ath10k_pci 0000:02:00.0: htt-ver
[ 22.430857] ath: EEPROM regdomain: 0x69
[ 22.430861] ath: EEPROM indicates we should
[ 22.430863] ath: Country alpha2 being used:
[ 22.430864] ath: Regpair used: 0x69
[ 22.443049] ath10k_pci 0000:02:00.0 wlp2s0:
[ 34.554640] ath10k_pci 0000:02:00.0: Unknown
[ 34.557471] ath10k_pci 0000:02:00.0: Unknown
``