I just got the Dell 2715H and hooked it up to my Тинкпад В530 путь the docking station's DisplayPort. The laptop ты существуешь an nVidia K1000M with 2GB of memory. The монитор is detected умер using both the nouveau and the proprietary nVidia драйверы, but in both вступи в брак seems to cut out periodically.
Многообразный гve tried configurations using xorg.conf, lxrandr and the nVidia X server config utility, but to не avail. In all жени the монитор will periodically go black (эксперт if going into power save mode) and then ест back. If I boot the laptop (while docked) with the laptop сражение open, the монитор tends to stay 'on' longer.
I really have не разрабатывает what to try next. гve gone through: - nouveau with/without xorg.conf - nVidia with/without xorg.conf - these directions
Any and all suggestions will be appreciated.
Output of xrandr:
Screen 0: minimum 8 x 8, current 4160 x 1440, maximum 16384 x 16384
VGA-0 disconnected primary (normal left inverted right x axis y axis)
LVDS-0 connected 1600x900+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1600x900 60.2*+ 50.0
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 connected 2560x1440+1600+0 (normal left inverted right x axis y axis) 597mm x 336mm
2560x1440 60.0*+
2048x1152 60.0
1920x1200 59.9
1920x1080 60.0 59.9 50.0 30.0 25.0 24.0 60.1 60.0 50.0
1680x1050 60.0
1600x1200 60.0
1280x1024 75.0 60.0
1280x720 60.0 59.9 50.0
1200x960 59.9
1152x864 75.0
1024x768 75.0 60.0
800x600 75.0 60.3
720x576 50.0 50.1
720x480 59.9 60.1
640x480 75.0 59.9 59.9
Current xorg.conf:
Section "ServerLayout"
# Removed Option "Xinerama" "off"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
Option "AIGLX" "on"
EndSection
Section "Files"
ModulePath "/usr/lib/nvidia-current/xorg"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us+inet"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL U2715H"
HorizSync 30.0 - 113.0
VertRefresh 56.0 - 86.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro K1000M"
Option "AddARGBGLXVisuals" "True"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-5: nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Я разрешил проблему:
я все еще получаю мерцание (вход в энергосберегающий режим) на запуске во время экранов начальной загрузки BIOS, но как только личинка вступает во владение, все обосновывается в приятно.
Для записи, другой установки с Dell M4400 рабочий Fedora 21 (LXDE) не имел проблемы, которая является тем, что привело меня пытаться обновить Lubuntu.
, В то время как я использую собственные драйверы Nvidia (v352) на моей установке Lubuntu, работах монитора точно также с ноутбуком Dell, работающим neuveau.
не ожидал обновлять мою установку монитора, пожрет неделю моего времени...