I still don't снял understand the last two numbers in Fstab... I heard that one is the "dump", and "демпинг" didn't sound like anything I wanted and/or needed, so I gave it в value of 0... I also read that the last digit was for some sort of в "diskchk" or something, and that the worse that could happen if I удар в лунку в 0 here, is that the system wouldn't do checks for errors on that disk... гm sure that's all wrong though...
Right now гm having to click on both sdb1 and sdc1 just to mount them, гm hoping for all drives to mount smoothly at startup...
Here's some code that might provide insight as to where I fumbled...
plex@plex-TZ68K ~ $ sudo fdisk -l
[sudo] password for plex:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007f670
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 256952319 128372736 7 HPFS/NTFS/exFAT
/dev/sda3 256954366 488396799 115721217 5 Extended
/dev/sda5 471803904 488396799 8296448 82 Linux swap / Solaris
/dev/sda6 256954368 471803903 107424768 83 Linux
Partition table entries are not in disk order
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes
255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x47d9be29
Device Boot Start End Blocks Id System
/dev/sdc1 2048 2930274303 1465136128 7 HPFS/NTFS/exFAT
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdd1 1 3907029167 1953514583+ ee GPT
AND
plex@plex-TZ68K ~ $ sudo blkid
/dev/sda1: LABEL="System Reserved" UUID="7A1ED0151ECFC7F9" TYPE="ntfs"
/dev/sda2: UUID="80F833A5F833987C" TYPE="ntfs"
/dev/sda5: UUID="e881ffcf-37ab-43d1-b1a4-eb00581b7110" TYPE="swap"
/dev/sda6: UUID="9f820e61-077d-4975-80eb-838c834ed7b1" TYPE="ext4"
/dev/sdb1: LABEL="SAVED BY GRACE" UUID="516A78EA019DAC70" TYPE="ntfs"
/dev/sdc1: LABEL="I LOVE YOU !" UUID="543E2FD13E2FAB46" TYPE="ntfs"
/dev/sdd2: LABEL="KILLUMINATI - ONE" UUID="E46014BE6014997E" TYPE="ntfs"
And this is what my Фстаб Филе looks like
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda6 during installation
UUID=9f820e61-077d-4975-80eb-838c834ed7b1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=e881ffcf-37ab-43d1-b1a4-eb00581b7110 none swap sw 0 0
UUID="E46014BE6014997E" /mnt/external_hdd ntfs-3g defaults 0 0
UUID="543E2FD13E2FAB46" /media/plex/I LOVE YOU ! ntfs-3g defaults 0 0
UUID="516A78EA019DAC70" /media/plex/SAVED BY GRACE ntfs-3g defaults 0 0
Many thanks to all of you who aid us recent converts...
[DUMP]
для резервного копирования и обычно устанавливается на 0.
Сохраняют <pass>
0 для ntfs3g файловых систем как есть
В Вашем использовании случая, escape-последовательность \040
для выхода из пробелов в записях точки монтирования
UUID="543E2FD13E2FAB46" /media/plex/I\040LOVE\040YOU\040! ntfs-3g defaults 0 0
UUID="516A78EA019DAC70" /media/plex/SAVED\040BY\040GRACE ntfs-3g defaults 0 0
Сделанный
Вот является одним из моих сообщений на этом: