Не может обновить/обновить человечность 18.04, поскольку apt/dpkg ошибка обнаруживается

Я использовал человечность 18.04 долгое время теперь, и она хорошо работала до этого утра, когда я включил свой ПК и использовал терминал для обновлений.

Это - вывод sudo apt upgrade

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  libuchardet0 lollypop-portal mpv phantomjs python3-bs4 python3-html5lib
  python3-lxml python3-pylast python3-pyxattr python3-webencodings rtmpdump
  youtube-dl
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
26 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up python3 (3.6.5-3ubuntu1) ...
running python rtupdate hooks for python3.6...
E: py3compile:183: cannot create directory /usr/share/hplip/ui5/__pycache__: FileNotFoundError(2, 'No such file or directory')
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aboutdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/aligndialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/cleandialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/colorcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devicesetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/deviceuricombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr5_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/devmgr_ext.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabgrouptable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabnametable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/fabwindow_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/faxsetupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/filetable.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/firmwaredialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/infodialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/linefeedcaldialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/loadpapergroupbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/makecopiesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/mimetypesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/nodevicesdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindiagnose_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/plugindialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pluginlicensedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/pqdiagdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printernamecombobox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettings_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printsettingstoolbox.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/printtestpagedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/queuesconf.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/readonlyradiobutton.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/sendfaxdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/settingsdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/setupdialog_base5.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systemtray.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/systrayframe_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/ui_utils.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/upgradedialog_base.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog.py'
[Errno 2] No such file or directory: '/usr/share/hplip/ui5/wifisetupdialog_base.py'
error running python rtupdate hook hplip-data
dpkg: error processing package python3 (--configure):
 installed python3 package post-installation script subprocess returned error exit status 4
dpkg: dependency problems prevent configuration of update-notifier-common:
 update-notifier-common depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package update-notifier-common (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of idle:
 idle depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package idle (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python3-update-manager:
 python3-update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
                          No apport report written because the error message indicates its a followup error from a previous failure.
                                                    No apport report written because MaxReports is reached already
                                  dpkg: dependency problems prevent configuration of python3-dev:
 python3-dev depends on python3 (= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.

dpkg: error processing package python3-dev (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gnome-shell:
 gnome-shell depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-shell (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of netplan.io:
 netplan.io depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package netplan.io (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of nplan:
 nplan depends on netplan.io; however:
  Package netplan.io is not configured yet.

dpkg: error processing package nplan (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-notifier:
 update-notifier depends on update-notifier-common (= 3.192.1.3); however:
  Package update-notifier-common is not configured yet.

dpkg: error processing package update-notifier (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of unattended-upgrades:
 unattended-upgrades depends on python3; however:
  Package python3 is not configured yet.

dpkg: error processing package unattended-upgrades (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of idle3:
 idle3 depends on python3 (>= 3.6.5-3ubuntu1); however:
  Package python3 is not configured yet.
 idle3 depends on idle (>= 3.6.5-3ubuntu1); however:
  Package idle is not configured yet.

dpkg: error processing package idle3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager:
 update-manager depends on python3:any (>= 3.3.2-2~); however:
  Package python3 is not configured yet.
 update-manager depends on update-notifier; however:
  Package update-notifier is not configured yet.
 update-manager depends on policykit-1-gnome | polkit-kde-agent-1 | lxpolkit | lxqt-policykit | mate-polkit | polkit-1-auth-agent; however:
  Package policykit-1-gnome is not installed.
  Package polkit-kde-agent-1 is not installed.
  Package lxpolkit is not installed.
  Package lxqt-policykit is not installed.
  Package mate-polkit is not installed.
  Package polkit-1-auth-agent is not installed.
  Package gnome-shell which provides polkit-1-auth-agent is not configured yet.

dpkg: error processing package update-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gnome-menus:
 gnome-menus depends on python3:any (>= 3.1~); however:
  Package python3 is not configured yet.

dpkg: error processing package gnome-menus (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of update-manager-core:
 update-manager-core depends on python3:any (>= 3.2~); however:
  Package python3 is not configured yet.
 update-manager-core depends on python3-update-manager (= 1:18.04.11.3); however:
  Package python3-update-manager is not configured yet.

dpkg: error processing package update-manager-core (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gdm3:
 gdm3 depends on gnome-shell (>= 3.19.92); however:
  Package gnome-shell is not configured yet.

dpkg: error processing package gdm3 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent processing triggers for gconf2:
 gconf2 depends on python3:any; however:
  Package python3 is not configured yet.

dpkg: error processing package gconf2 (--configure):
 dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
No apport report written because MaxReports is reached already
                                                              Errors were encountered while processing:
 python3
 update-notifier-common
 idle
 python3-update-manager
 python3-dev
 gnome-shell
 netplan.io
 nplan
 update-notifier
 unattended-upgrades
 idle3
 update-manager
 gnome-menus
 update-manager-core
 gconf2
 gdm3
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)

Я нашел другое сообщение, но я не могу прокомментировать это, не задавая вопрос сам, таким образом, вот моя проблема. справка ценилась бы. Я также работал apt-cache policy hplip как был спрошен в другом сообщении и получил тот же результат.

]hplip:
  Installed: 3.17.10+repack0-5
  Candidate: 3.17.10+repack0-5
  Version table:
 *** 3.17.10+repack0-5 500
        500 http://in.archive.ubuntu.com/ubuntu bionic/main amd64 Packages
        100 /var/lib/dpkg/status