Добавление диска в деградированный массив RAID1
Исправление очень простое. Откройте терминал и запустите команду sudo apt-get update && sudo apt-get upgrade, а затем перезагрузите компьютер.
2
задан Yufenyuy Veyeh Dider
22 May 2018 в 21:09
поделиться
2 ответа
Прочитайте man dmraid. В нем говорится, в частности:
{-R| --rebuild} RAID-set [device-path]
Rebuild raid array after a drive has failed and a new drive is added. For Intel chipset based systems, there are two methods in which a new drive is added to
the system.
1. Using OROM to identify a new drive
During system reboot, enter OROM and mark the new drive as the rebuild drive.
After booting to the OS, use the dmraid command to rebuild.
Example: dmraid -R raid_set
2. Using dmraid to identify a new drive
Boot to the OS and use the dmraid command with the new drive as the second parameter.
Example: dmraid -R raid_set /dev/sdc
3. Using hot spare drive
Mark a drive as hot spare using the "dmraid -f isw -S" command. Then use the dmraid command to start the rebuild.
Example: dmraid -R raid_set
1
ответ дан waltinator
17 July 2018 в 13:42
поделиться
Прочитайте man dmraid. В нем говорится, в частности:
{-R| --rebuild} RAID-set [device-path]
Rebuild raid array after a drive has failed and a new drive is added. For Intel chipset based systems, there are two methods in which a new drive is added to
the system.
1. Using OROM to identify a new drive
During system reboot, enter OROM and mark the new drive as the rebuild drive.
After booting to the OS, use the dmraid command to rebuild.
Example: dmraid -R raid_set
2. Using dmraid to identify a new drive
Boot to the OS and use the dmraid command with the new drive as the second parameter.
Example: dmraid -R raid_set /dev/sdc
3. Using hot spare drive
Mark a drive as hot spare using the "dmraid -f isw -S" command. Then use the dmraid command to start the rebuild.
Example: dmraid -R raid_set
1
ответ дан waltinator
20 July 2018 в 13:46
поделиться
-
1