У меня проблема с многофункциональным принтером-сканером ricoh sp 211 su. Я установил драйвер r78188en.exe , который является драйвером сканера Linux SANE и содержит sp-200series_Scanner-1.01-noarch. Принтер обнаружен, и он работает, после чего я установил его, добавив принтер с универсальным драйвером. Сканер не работает, и xsane, и simple-scan его не обнаруживают. Устройство определяется как указано lusb и sane-find-scanner:
lsusb
Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05ca:044f Ricoh Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x05ca [RICOH ], product=0x044f [RICOH SP 211SU]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
, пока оно не обнаружено
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Я уже установил sudo apt install libsane-extras
и вручную изменил файл /lib/udev/rules.d/60-libsane1.rules
путем добавления следующих строк:
# Ricoh SP 211
ATTRS{idVendor}=="05ca", ATTRS{idProduct}=="044f", MODE="664", GROUP="scanner", ENV{libsane_matched}="yes"
и файла /etc/sane.d/ricoh.conf
путем добавления:
usb 0x05ca 0x044f
Сканер по-прежнему не работает. У вас есть идеи?
Заранее спасибо.