Установить драйверы B43 без подключения к Интернету [закрыто]

Я весь день пытался решить эту проблему, но безрезультатно. Я использую elementaryOS Luna, но поскольку она работает на Ubuntu ...

У меня проблема в том, что в моем Dell Vostro 1500 неисправен Ethernet. По какой-то причине он не может подключиться к Ethernet, скорее всего, из-за аппаратной проблемы, поэтому мне нужно установить драйверы, не имея Интернета на компьютере, на котором он устанавливается.

Никакие решения, требующие второго компьютера с Linux, работать не будут. Это набирается из OS X, а другой компьютер, который у меня есть, - это компьютер с проблемой.

Запуск lspci Я получаю:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

Я знаю, что мне нужен набор прошивки b43 или что-то в этом роде, но я не могу найти никаких инструкций, которые работают для меня.

Любая другая информация, которая может вам помочь, сообщите мне, и я сделаю все возможное, чтобы ее предоставить.

P.S .: Чтобы получить вывод команд, я отправляю вывод команды в текстовый файл на USB, а затем копирую вставку сюда с рабочего компьютера.

РЕДАКТИРОВАТЬ 1:

Вывод dmesg | grep -e b43 -e wlan :

[    2.740106] b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.740171] b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
[   13.026193] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   13.122019] Registered led device: b43-phy0::tx
[   13.122046] Registered led device: b43-phy0::rx
[   13.122069] Registered led device: b43-phy0::radio
[   14.340121] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[   19.988670] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.988964] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.680660] wlan0: authenticate with 00:26:44:bc:0f:78 (try 1)
[   23.684805] wlan0: authenticated
[   23.685338] wlan0: associate with 00:26:44:bc:0f:78 (try 1)
[   23.692129] wlan0: RX AssocResp from 00:26:44:bc:0f:78 (capab=0x411 status=0 aid=5)
[   23.692135] wlan0: associated
[   23.693238] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   34.660029] wlan0: no IPv6 routers present
[   69.204860] wlan0: deauthenticating from 00:26:44:bc:0f:78 by local choice (reason=3)
[   73.033034] wlan0: authenticate with 00:26:44:bc:0f:78 (try 1)
[   73.034978] wlan0: authenticated
[   73.035362] wlan0: associate with 00:26:44:bc:0f:78 (try 1)
[   73.041193] wlan0: RX ReassocResp from 00:26:44:bc:0f:78 (capab=0x411 status=0 aid=5)
[   73.041198] wlan0: associated
[   84.024051] wlan0: no IPv6 routers present
[  118.208901] wlan0: deauthenticating from 00:26:44:bc:0f:78 by local choice (reason=3)
[  122.305180] wlan0: authenticate with 00:26:44:bc:0f:78 (try 1)
[  122.308896] wlan0: authenticated
[  122.309598] wlan0: associate with 00:26:44:bc:0f:78 (try 1)
[  122.331440] wlan0: RX ReassocResp from 00:26:44:bc:0f:78 (capab=0x411 status=0 aid=5)
[  122.331450] wlan0: associated
[  132.584138] wlan0: no IPv6 routers present
[  168.205906] wlan0: deauthenticating from 00:26:44:bc:0f:78 by local choice (reason=3)
[  172.312791] wlan0: authenticate with 00:26:44:bc:0f:78 (try 1)
[  172.314841] wlan0: authenticated
[  172.315380] wlan0: associate with 00:26:44:bc:0f:78 (try 1)
[  172.320773] wlan0: RX ReassocResp from 00:26:44:bc:0f:78 (capab=0x411 status=0 aid=5)
[  172.320783] wlan0: associated