Могут ли датчики-детекторы сделать что-нибудь плохое для моей машины?

Я недавно установил lm-sensors и выполнил команду (как указано здесь здесь ):

sudo sensors-detect

Но потом я прочитал на ней страницу man, на которой было написано:

DESCRIPTION
       sensors-detect is an interactive program that will walk you through the process of scanning your system for various hardware monitor‐
       ing chips, or sensors, supported by libsensors(3), or more generally by the lm_sensors tool suite.

       sensors-detect will look for the following devices, in order:

       ·      Sensors embedded in CPUs, south bridges and memory controllers.

       ·      Sensors embedded in Super I/O chips.

       ·      Hardware monitoring chips accessed through ISA I/O ports.

       ·      Hardware monitoring chips reachable over the SMBus or more generally any I2C bus on your system.

       As the last two detection steps can cause trouble on some systems, they are normally not attempted if the second detection  step  led
       to  the  discovery  of  a Super I/O chip with complete hardware monitoring features.  However, the user is always free to ask for all
       detection steps if so is his/her wish. This can be useful if a given system has more than one hardware monitoring chip. Some  vendors
       are known to do this, most notably Asus and Tyan.

И:

WARNING
       sensors-detect needs to access the hardware for most of the chip detections.  By definition, it doesn't know which  chips  are  there
       before  it  manages  to identify them. This means that it can access chips in a way these chips do not like, causing problems ranging
       from SMBus lockup to permanent hardware damage (a rare case, thankfully.)

       The authors made their best to make the detection as safe as possible, and it turns out to work just fine in most cases,  however  it
       is  impossible  to  guarantee that sensors-detect will not lock or kill a specific system. So, as a rule of thumb, you should not run
       sensors-detect on production servers, and you should not run sensors-detect if can't afford replacing a random part of  your  system.
       Also, it is recommended to not force a detection step which would have been skipped by default, unless you know what you are doing.

Но поскольку я действительно не предупреждал, когда запускал первую последнюю часть, я запустил ее, и результат был:

Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

1113 Хотя вторая последняя часть правильно предупредила меня, я не запустил ее. Но тот факт, что он говорит No для первого последнего, означает ли это что-нибудь, или есть ли какой-либо способ сказать (кроме ожидания), был ли нанесен какой-либо ущерб моей системе? Программа вообще указала бы, что случилось что-то плохое? Или есть какой-нибудь способ проверки?

У меня есть Lenovo B590.

---

Информация об ОС:

Description:    Ubuntu 15.04
Release:    15.04