Блендер Ubuntu Gnome 16.04 2.77a рендеринг GPU, не активный
Я выполняю Ubunru Gnome 16.04. Мой ноутбук имеет Nvidia GT 740M, и я установил драйвер nvidia-364. Я установил CUDA-ИНСТРУМЕНТЫ 7.5. Как я могу включить рендеринг GPU для Блендера 2.77a?
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: Hewlett-Packard Company 3rd Gen Core processor DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d2000000-d2ffffff
Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company 3rd Gen Core processor Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at d3000000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family USB xHCI Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 25
Memory at d3700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family MEI Controller
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d3714000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d3719000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family High Definition Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at d3710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: d3600000-d36fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d1000000-d1ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d3500000-d35fffff
Prefetchable memory behind bridge: 00000000d3400000-00000000d34fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family USB Enhanced Host Controller
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at d3718000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
Subsystem: Hewlett-Packard Company HM77 Express Chipset LPC Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at 5088 [size=8]
I/O ports at 5094 [size=4]
I/O ports at 5080 [size=8]
I/O ports at 5090 [size=4]
I/O ports at 5060 [size=32]
Memory at d3717000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family SMBus Controller
Flags: medium devsel, IRQ 10
Memory at d3715000 (64-bit, non-prefetchable) [size=256]
I/O ports at 5040 [size=32]
Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
Subsystem: Hewlett-Packard Company GK208M [GeForce GT 740M]
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 4000 [size=128]
[virtual] Expansion ROM at b2000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_364_drm, nvidia_364
07:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
DeviceName: Intel(R) Wi-Fi Link 2330
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Flags: bus master, fast devsel, latency 0, IRQ 31
Memory at d3600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Subsystem: Hewlett-Packard Company RTS5229 PCI Express Card Reader
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at d1000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
DeviceName: Hanksville Gbe Lan Connection
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at 2000 [size=256]
Memory at d3500000 (64-bit, non-prefetchable) [size=4K]
Memory at d3400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
-3
задан anand mbs
29 June 2016 в 09:32
поделиться
3 ответа
Спасибо много, я зафиксировал его для своего GT740M в Ubuntu Gnome 16.04
- , Открытый терминал и тип sudo склонный - получают nvidia-364
- установки Затем, я загрузил блендер с его сайта
- После извлечения, которое я открыл, терминал в той существующей папке (щелкните правой кнопкой в папке и выберите "Open in Terminal")
- Тип sudo./блендер
- и ta daaaa, у Вас будет рендеринг GPU (Пользовательские настройки---> Система----> CUDA)
Благодарят все справка
1
ответ дан Mehman Jamal
29 September 2019 в 00:58
поделиться
Рендеринг GPU с Циклами не включен по умолчанию с Блендером. Выберите Циклы как свой механизм визуализации наверху Вашей сцены как Блендер по умолчанию, Внутренний рендерер не может использовать GPU.
Для включения рендеринга GPU войдите в Пользовательские настройки, и под вкладкой System, выберите Вычислить Устройство (устройства) для использования. Затем, для каждой сцены, можно настроить для использования ЦП или рендеринга GPU в свойствах Render.
0
ответ дан Jibberish51
29 September 2019 в 00:58
поделиться
Попытайтесь обновить свои графические драйверы NVIDIA первым выполнением:
sudo apt update && sudo apt upgrade
И затем выполнение:
sudo apt install nvidia-current && sudo apt install nvidia-current-updates
Согласно веб-сайт Блендеров , Вам только нужна модель 2.0 программы построения теней или выше поддерживать Циклы, и согласно Nvidia, Ваша карта поддерживает модель 3.0, таким образом, это не проблема.
Мой ноутбук имеет 650M, и способность переключиться между этим и графикой Intel. Однажды я должен был запустить панель управления Nvidia и вынудить ее присвоить Блендер для использования карты Nvidia, потому что она принимала значение по умолчанию к процессору Intel. Это находилось под окнами, и я не знаю, обеспечивает ли Nvidia эту возможность коммутации в соответствии с Linux или нет.
0
ответ дан Jibberish51
29 September 2019 в 00:58
поделиться